Thank You and Merry Christmas Milton Shupe and your team
Thank You and Merry Christmas Milton Shupe and your team
Great job ! Thanks, Milton ! Merry Christmas to you !
Hi Milton
I've been using the turbine Mallard in P3D V3.4 (one of the last versions before V4) and it works well. I experienced quite a buzzing with the original sound set at idle so I switched it for a package designed for a Dash-7 and after some fiddling it works well. I will go back and revisit the original set at some point. Aside from that (which could be something in my computer) the machine flies really well for me. My wife gave me a new joystick for Christmas (tired of the cursing I think) and now I can almost stay on the runway, so progress in all directions.
Thanks for doing this Mallard and the best for 2018.
Warren (aspen31)
A wonderful aircraft! Thank you so much Milton!
Brian
Milton, thank you for this wonderful bird. This is the first TP I am using...
Any chance to have an update also for the radial engines versions (or did I miss it)?
Anyway, one more brilliant addition to my hangar!
All the best to you
Windows 10 x64, Z170A Gaming Pro Mobo, i7-6700K CPU (no O/C), 32 Gb DDR4 RAM, RTX3060 12Gb, P3D v5 latest edition, mesh Toposim, packs ORBX FTX Global Base + Vector + OpenLC, + Trees HD, ASP3D, ASCA, P3D v6 latest edition, mesh Toposim + TEP, X-Plane 12, simHeaven X-World, M2XP Antarctica
That is interesting to hear Warren. There were no changes to the original sound package but maybe being native has some affect on the sounds.
Thank you Sir (and thanks to all of the other comments).
I have not done the radial version yet as LDR did a native version with a full 3D gauge cockpit and some nice extras that is very nice.
If there is demand for my original, then that will be considered.
Thanks for the nice Grumman, very nice aircraft, on a related note anyone know of a good SA or HU-16B albatross other than Virtivia's that works with P3D V4 ?
Hi Milton
I'll admit I didn't spend much time with the original package and once in a while with my system it appears that there can be some "teething" problems when I first use a package which on subsequent use disappear so I will try the original again. I did notice on a recent flight that the "Yoke" icon is unusable for me. It highlights but does not cause the yoke to disappear. I am referring to the icon to the right of the GPS icon which I assume to be the yoke "appear / disappear" switch.
Nice airplane
Thanks
Warren
Charlie Awaiting the new Microsoft Flight Sim and will eventually buy a new computer. Running a Chromebook for now!
My motto is "Never cloud the issue with facts". If only it was that easy to fix my airmanship.
Take care and thanks - Happy New Year!
Warren
My little contribution for those of you with the rxp gns2: I squeezed in a 430. It looks ok to me.
In vc2 in the radio section (panel.cfg):
gauge19=Bendix_King_Radio!Bendix-King Radio Audio, 442,699,415,60
gauge20=rxpGNS2!GNS_430_1, 442,757,414,190
gauge21=Bendix_King_Radio!Bendix-King Radio Nav-Comm 2, 442,946,412,104
gauge22=Bendix_King_Radio!Bendix-King Radio ADF, 1031,722,411,87
gauge23=Bendix_King_Radio!Bendix-King Radio DME, 1031,807,411,104
gauge24=Bendix_King_Radio!Bendix-King Radio Xpndr, 1031,909,411,102
In Window02 (panel.cfg):
Background_color=0,0,0
size_mm=456,460
window_size_ratio=1.000
position=0
visible=0
ident=GPS_PANEL
window_size= 0.110, 0.300
window_pos= 0.000, 0.000
gauge00=rxpGNS2!GNS_430_1, 0,0,456,460
LouP
Thanks Milton! Great stuff !
"Hornets by mandate, Tomcats by choice!"
Well a very interesting amphibian the Grummman Mallard (PT6) has rebounded into FSX nicely. All I can say Milton, is that thanks because today I spent several wonderful hours on a run in the new FSX Native TP Mallard from Ushusia Naval Base in Argentina, down to Cape Horn and then back to Rio Grande, low, mid and FL's. Thoroughly good fun, great model, ho bugs, no hitches nothing just so pleasant to fly. The textures are crisp and in FSX-A, operated flawlessly. Very nice work. Had a great day thanks to Milton. Perfect score!!
Outbound early am.
ORBX South America LC/Global. Seems to be very good with detail and brings South America alive to my mind, just in case any one was curious. Weather real time via FSXWX using REX Textures. Aeroplane by Milton Shupe. Gold Star.
Happy holidays and a big thank you for all the wonderful vehicles (I have to include the Bounty!) you give us Milton!
- JP
- Jens Peter "Penz" Pedersen
Thanks everyone for your comments. We are appreciative. Let's remember that products like this come only through the excellent teamwork and contributions of many talented contributors.
These people contributed and/or worked tirelessly for a long time to get to this point.
Grumman Mallard G-73AT
Team Contributors
Gmax Model by Milton Shupe
Flight Model, Panel and gauge setup by Milton Shupe and Roman Stoviak
Original Gauges by Scott Thomas with mods by Milton Shupe, Nigel Richards, and Roman Stoviak
Special effects, Fuel Selectors, DME, Shadin, Starters, AI, AP, 2D Popups, custom XML assistance, and special function gauges by Roman Stoviak
Sounds by Nigel Richards
Early Paint Kits by Rachael Whiteford, Rui Cristina (now dated)
Current Paint Kit by Nigel Richards (available at sim-outhouse.com)
http://www.sim-outhouse.com/sohforum...1683&catid=176
Original Pilot Figure donated by Craig Richardson ("Full")
Textures by Rui Cristina, Nigel Richards, William Ellis, and Martial Feron
The FSX native conversion was done by Milton Shupe.
My thanks go out to all the efforts everyone put into the Mallard series and the final products.
Milton Shupe
July 2016
FSX/P3D native conversion December 2017
Well,
Thanks to everyone involved for providing us with this great Christmas gift.
One day without laughter, is one day without living.
One day without Flight Simming, is one day lost living.
Milton; you've made an awesome job of taking this Gal native - perfect for some much needed R & R holiday flying, just loving it!
Thank YOU for going that extra mile, Sir :-)
Most men often say what they think!
An honest man usually means what he says!
A gentleman always says what he means!
"Αίεν Υψικρατείν "
A fool is not he who asks a simple question, but he who would simply have its asking denied. (Richards 2012)
Thank you Milton and team! What a great aircraft for coastal exploration
SYSTEM :
OS:Win7 Home Premium 64 bit UAC OFF!
DX version Dx10 with Steve's Fixer.
Processor:I5 4670k overclocked to 4.4 gHz with Corsair CW-9060008-WW hydro cooler
Motherboard:Z87
RAM:16 gig 1866 gigaHz Corsair ram
Video Card:MSI 1070 8 gig ram
HD:2Tb Samsung 850 evo SSD
To err is human; to forgive is divine
Windows 10 x64, Z170A Gaming Pro Mobo, i7-6700K CPU (no O/C), 32 Gb DDR4 RAM, RTX3060 12Gb, P3D v5 latest edition, mesh Toposim, packs ORBX FTX Global Base + Vector + OpenLC, + Trees HD, ASP3D, ASCA, P3D v6 latest edition, mesh Toposim + TEP, X-Plane 12, simHeaven X-World, M2XP Antarctica
Thank you Team Mallard, another wonderful turboprop to add to the stable, not sure about the boat part.
Fly Navy/Army
USN SAR
DUSTOFF/ARMY PROPS
Thank-you, Milton and co. for this FSX native model. It flies much smoother than the port-over and with better fps as well.
Just one question.
I tried adding some lighting to brighten up a bit the the cockpit panel esp. at dusk/night and must have done something wrong. When I click the 'panel' light switch 'on', I get the panel section lit up as well as the entire VC (overhead light), but no back cabin. When I click the 'cabin' light switch 'on', I get the cabin lights coming on as well as some more additional VC lights coming on.
All of this is good, but here's my question : is there is a way of 'only' having the instrument panel lights come on without any VC (overhead) lighting when the 'panel' light switch is the only light switch turned 'on', and perhaps tying the overhead VC lighting to the 'cabin' light switch ?
Here's my config with the changes I made :
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0=1, -26.158000, 0.000000, 13.389000, fx_beacon
light.1=3, 0.030000, -32.870000, 1.653000, fx_navred
light.2=3, 0.030000, 32.870000, 1.653000, fx_navgre
light.3=7, -0.577000, 32.641000, 1.942000, fx_navwhi
light.4=7, -0.577000, -32.641000, 1.942000, fx_navwhi
light.5=9, -3.350000, -2.720000, -5.250000, SP2112_MALLARD_TRANSOM_DROP //LOGO
light.6=9, -3.350000, 2.720000, -5.250000, SP2112_MALLARD_TRANSOM_DROP //LOGO
light.7=10, 3.185000, -1.548000, -0.522000, fx_vclighth //cabinlites
light.8=10, 3.185000, 1.548000, -0.522000, fx_vclighth //cabinlites
light.9=10, -6.541000, -1.548000, -0.522000, fx_vclighth //cabinlites
light.10=10, -6.541000, 1.548000, -0.522000, fx_vclighth //cabinlites
light.11=4, 7.2, -1.15, -0.18, fx_vclight
light.12=4, 7.2, 1.15, -0.18, fx_vclight
Cheers, MZee ...
W11, Ryzen 9 7950X3D, GeForce RTX 4090 AERO OC, ROG Strix X670E-A Gaming, G.Skill Trident Z5 Neo RGB DDR5-6000 CL30 AMD EXPO 32GB (2), Kraken Z73 360mm, Lian Li UniFan SL120 V2 (10), Samsung 990 PRO PCIe 4.0 NVMe 2TB (4), MEG Ai1300P, Lian Li O11D XL, Logitech Z906 5.1, T16000M FCS HOTAS, Xbox Controller, Acer Nitro XV282K 4K UHD LED.
All white "Arctic" build.
Bookmarks