It'll be hard to improve upon Milton's offerings, but it appears that Carenado has D18 in the works...
http://www.carenado.com/CarSite/Port...8868581901.jpg
It'll be hard to improve upon Milton's offerings, but it appears that Carenado has D18 in the works...
http://www.carenado.com/CarSite/Port...8868581901.jpg
-Mark
I suppose it will be nice to have an updated model, but I can't say I've enjoyed flying any of Carenado/Alabeo's aircraft for quite some time.
..and really hard to repaint probably
You can find most of my repaints for FSX/P3D in the library here on the outhouse.
For MFS paints go to flightsim.to
Well, it's about time someone did a nice model of this aircraft. I for one am happy to see it. My old unit is 12 years old and I think this is an exciting development much needed in the FSX/P3D world.
Saluté
Hallelujah! Couldn't agree more with Milton. I've looking forward to an brand new D-18 for a long time. It's been great to have freeware to fly but I am really glad that this aircraft is being built from scratch for FSX and beyond. Can't wait to see the new VC.
I wish Simcoders would produce their reality expansion packs for Carenado airplanes in the FSX/P3D environment as well
Without this, and combined with the "almost impossible to repaint" problems mentioned earlier, I'm afraid this D-18 is not going to be very interesting...
It's Carenado, so it is guaranteed to be an absolutely stunning visual model. Beyond that... I'll likely pass.
My computer: ABS Gladiator Gaming PC featuring an Intel 10700F CPU, EVGA CLC-240 AIO cooler (dead fans replaced with Noctua fans), Asus Tuf Gaming B460M Plus motherboard, 16GB DDR4-3000 RAM, 1 TB NVMe SSD, EVGA RTX3070 FTW3 video card, dead EVGA 750 watt power supply replaced with Antec 900 watt PSU.
I wish they would have done a different model. Milton did one, which is still a classic, and there are others out there as well. Maybe if they did a G model with three-bladed props and the newer wing and slightly longer nose on it, which can be modded into a Volpar very easily, I would be getting excited. What's next, another 172? I also go along with the unpaintable comments as well. BUT ....... it WILL look pretty.
Don
Sticking with Milton. As much as how super their visual models are, both Carenado and Alabeo are the most aggravating to repaint. I like to personalize the aircraft I "fly".
Until they change their paint kit ways (don't hold your breath) this is another pass. Keep up your good work Milton.
Looking at that model, that is one element that is still missing... self reflection. Notice the cowl reflection on the fuselage. I'v tried that once on the Howard.
"Time is God's way of keeping everything from happening at once"
it's not so much the paintkit ways, I find the white textures perfectly easy to paint, I may even prefer them over regular psd paintkits, much easier on my old system. Here's one to prove my point:
No, it's the lay-out of the textures that is the problem. Bit and pieces all over the place, cut up fuselages, sometimes rotated relative to each other as well.. I tried really hard to make some decent paints for the Aerocommander, but it was just too complicated. Remember, I do this for fun, and there was no fun in that one. So as long as they make a model with a half decent texture lay-out, count on paints from me. If not, forget it.
You can find most of my repaints for FSX/P3D in the library here on the outhouse.
For MFS paints go to flightsim.to
It definitely looks stunning
https://www.facebook.com/Carenado/
Greetings
Tim
Greetings
Tim
i5 12600K | 32Gb | RTX 4080
Milton yours is going to be hard to beat...
Ted
Vivat Christus Rex! Ad maiorem Dei gloriam
Sometimes..........
"Illegitimum non carborundum".
Phanteks Enthoo Evolv X D-RGB Tempered Glass ATX Galaxy Silver
Intel Core i9 10980XE Extreme Edition X
ASUS ROG Rampage VI Extreme Encore MB
Corsair Vengeance LPX 128GB (8x16GB), PC4-30400 (3800MHz) DDR4
Corsair iCUE H100i ELITE CAPELLIX White Liquid CPU Cooler, 240mm Radiator, 2x ML120 RGB PWM Fans
Samsung 4TB SSD, 860 PRO Series, 2.5" SATA III x4
Corsair 1600W Titanium Series AX1600i Power Supply, 80 PLUS Titanium,
ASUS 43inch ROG Swift 4K UHD G-Sync VA Gaming Monitor, 3840x2160, HDR 1000, 1ms, 144Hz,
FAA ZMP
PPL ASEL
| Windows 11 | MSI Z690 Tomahawk | 12700K 4.7GHz | EVGA GTX1080 Ti | 32GB 5600 MHz DDR5 | 500GB Samsung 860 Evo SSD | 2x 2TB Samsung 970 Evo M.2 | EVGA 850W Gold | Corsair 5000X |
Looking forward to the D18 and will be a must have purchase for me, as it is one of my favorite aircraft. I will keep Milton's and the FCS model asa they fulfill different functions.
SYSTEM :
OS:Win7 Home Premium 64 bit UAC OFF!
DX version Dx10 with Steve's Fixer.
Processor:I5 4670k overclocked to 4.4 gHz with Corsair CW-9060008-WW hydro cooler
Motherboard:Z87
RAM:16 gig 1866 gigaHz Corsair ram
Video Card:MSI 1070 8 gig ram
HD:2Tb Samsung 850 evo SSD
To err is human; to forgive is divine
I'll be buying this Carenado model in a heartbeat/just as soon as it is released. A great, great choice of aircraft.
Lenovo Legion T730 / Intel Core i9-9900K 3.6-5.0 GHz / 130W Liquid Cooling / GeForce RTX 2800 / 32GB DDR4 / MSI 550W PSU / 4K 43" TCL LED TV
Bookmarks