CP-140 KBT Aurora
Page 1 of 2 12 LastLast
Results 1 to 25 of 46

Thread: CP-140 KBT Aurora

  1. #1

    CP-140 KBT Aurora

    Hey fella's I have been trying to contact Hiroaki to request a couple small changes to his base P-3 model,..am asking for the standard CP-140 and the newer Block 1 variant with wingtip sensors both with wing weapons pilons removed. Does anyone have contact with him ,...I dealt with Hiroaki when we put together the P-3K2 Variant pack but he is not responding to emails I have sent ?

    Here are the thumbs from some paints I have prepared for her,...



    AB
    Attached Thumbnails Attached Thumbnails thumbnail (5).jpg   thumbnail.jpg   thumbnail (4).jpg   thumbnail (2).jpg   thumbnail.jpg  

  2. #2
    Did you ever get in contact/permission with Hiroaki to modify the model
    For once you have tasted flight you will walk the earth with your eyes turned skywards, for there you have been and there you will long to return. -Leonardo da Vinci


  3. #3
    Very cool
    I noticed this thread right now. If it is a simple refurbishment, I will create your aurora. This time it is special.

    Hiroaki

  4. #4
    Should I proceed?


    Attached Thumbnails Attached Thumbnails cp140wc.jpg   cp-140wingchip.jpg  

  5. #5
    YES
    Looking forward to another P-3 model and some good looking repaints.

    Regards Paul Day.

  6. #6
    Yes please Hiroaki.
    An important member of the P3 family.
    And 'Thank you'.
    "Illegitimum non carborundum".

    Phanteks Enthoo Evolv X D-RGB Tempered Glass ATX Galaxy Silver
    Intel Core i9 10980XE Extreme Edition X
    ASUS ROG Rampage VI Extreme Encore MB
    Corsair Vengeance LPX 128GB (8x16GB), PC4-30400 (3800MHz) DDR4
    Corsair iCUE H100i ELITE CAPELLIX White Liquid CPU Cooler, 240mm Radiator, 2x ML120 RGB PWM Fans
    Samsung 4TB SSD, 860 PRO Series, 2.5" SATA III x4
    Corsair 1600W Titanium Series AX1600i Power Supply, 80 PLUS Titanium,
    ASUS 43inch ROG Swift 4K UHD G-Sync VA Gaming Monitor, 3840x2160, HDR 1000, 1ms, 144Hz,

  7. #7
    Trial production

    Attached Thumbnails Attached Thumbnails cp-140wingchip2.jpg  

  8. #8
    SOH-CM-2022
    Join Date
    Jun 2005
    Location
    Back in the land of maple syrup
    Age
    62
    Posts
    736
    Looking very nice.
    Always enjoyed flying your P-3 series of aircraft.

    thanks
    Gavin

  9. #9
    Heya I will get the Paints to you later today hopefully if you would like to include them in the package

  10. #10
    The CP 140 seen in the picture is almost complete.
    After completing the light assignment, it is complete.


    Attached Thumbnails Attached Thumbnails cp140_0324.jpg   cp-140_.jpg  
    Last edited by kbt; March 23rd, 2018 at 23:34.

  11. #11
    I saw the CP-140 texture painted by Adrian. It became pretty good-looking CP-140.



  12. #12
    Finished making the CP140.




    There is no ReadMe and a file describing the explanation.
    Please place "Canadair CP-140 Aurora FSX" appearing after opening the file in the same folder as "P-3C ORION FSX".

    https://drive.google.com/open?id=1cK...W8Dw-Pe64lyxhu
    Attached Thumbnails Attached Thumbnails cp140_ab2.jpg  

  13. #13
    Finished making the CP140.

    There are similar threads, but both can download the same CP 140.




    There is no ReadMe and a file describing the explanation.
    Please place "Canadair CP-140 Aurora FSX" appearing after opening the file in the same folder as "P-3C ORION FSX".


    https://drive.google.com/open?id=1Es...fyxr3cbnr0f3EA

  14. #14
    Thank you for the very fine detailing with the model and excellent paint schemes...

  15. #15
    Thanks very much to all involved. Another great addition!
    "Try to stay in the middle of the air. Do not go near the edges of it. The edges of the air can be recognized by the appearance of ground, buildings, sea, trees and interstellar space. It is much more difficult to fly there".

  16. #16

    Official release version

    https://drive.google.com/open?id=1C_...25YPMvuersezBV

    Those who have already obtained "cp-140_ab_kbt_fsx_p3dv4.zip" in P3D thread are not necessary.

  17. #17
    One of the original requests was to remove the weapons pylons for this Canadian variant. I still see they are still included with this model. Just an observation.

    Tommy
    Windows 7 Professional 64 bit, 16 Gigs Ram
    Cooler Master HAF 932 Tower
    ASUS P7P55D Deluxe
    Intel Core i7-860 Lynnfield Quad-Core 2.8 GHz LGA 1156
    ZOTAC GeForce GTX 1050 Ti 4GB 128-Bit GDDR5
    SCEPTRE 27"
    WD Black 1 TB
    ASUS Xonar DS 7.1
    CORSAIR K95 RGB Platnum XT, PBT double-shot keycaps, Cherry MX Blue
    Logitech M510

  18. #18
    Is this new model base or can I use liveries for my existing KBT products?

  19. #19

  20. #20
    Quote Originally Posted by tommieboy View Post
    One of the original requests was to remove the weapons pylons for this Canadian variant. I still see they are still included with this model. Just an observation.

    Tommy
    It is easy if that is the case. I'll do it soon.

  21. #21
    Quote Originally Posted by Aharon View Post
    Is this new model base or can I use liveries for my existing KBT products?
    It is possible to use existing P3C textures, but this model is CP-140.
    Moreover, I think that it is difficult to repaint the color of the antenna arbitrarily.
    We may release the P-3C model later in the same version as CP 140.

  22. #22
    Quote Originally Posted by IFlySWA View Post
    Anyone planning a repaint like this?
    http://www.airliners.net/photo/Canad...ef0988c45eeff2

    Brian
    It is already existing.
    http://www.sim-outhouse.com/sohforum...ra-for-FSX-too

  23. #23
    cp140 model removed pylons

    https://drive.google.com/open?id=1Qjr6zUDpRk1uwo3e7-AoKPJzaNsJjC0O


    Installation
    Just pay attention to the file name and replace the model file.

    We plan to update the CP-140 equipped with this model at a later date.

  24. #24

  25. #25
    Quote Originally Posted by kbt View Post
    It is possible to use existing P3C textures, but this model is CP-140.
    Moreover, I think that it is difficult to repaint the color of the antenna arbitrarily.
    We may release the P-3C model later in the same version as CP 140.
    Thanks for reply and nice to meet you, Mr. KBT!! I have flown many of your KBT Electra products for Buffalo Airways virtual airline!! I also have flown your P-3 models too.

    Looking forward to your new CP-140 on avsim or flightsim when you finish your last minute adjustments.

    One question: on one of Buffalo Airways virtual airline Electra models, it cannot do tight backtracking on single runway without running into snow or grass. Where in aircraft.cfg can I adjust so that it can do proper backtracking at beginning or end of runway, please as Buffalo Airways uses Electras on very small airports' single runways.

    Regards,

    Aharon

Members who have read this thread: 0

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •