SSW REPUBLIC F-84F "Thunderstreak" for P3D x64 v4 available
Results 1 to 25 of 54

Thread: SSW REPUBLIC F-84F "Thunderstreak" for P3D x64 v4 available

Hybrid View

  1. #1

    SSW REPUBLIC F-84F "Thunderstreak" for P3D x64 v4 available

    http://www.sim-outhouse.com/sohforum...id=51358&stc=1

    Visit htttp://www.simskunkworks.com
    need to be registered, registration is free.

    High detailed model, fully animated


    High detailed 3D cockpit, fully animated and working
    Frame rate friendly in single and multi player, it cames in two versions:
    - 'SOLO' for single player use
    - 'UBUNTU' optimized for multiplayer
    - Complete dynamic 3D-lights systems both internal and external
    - Full compatible with TacPack and vACMI (required to use weapons system)

    TEXTURES


    High detailed, high definition, SSW 'redux' tecnology
    several different liveries


    SYSTEMS
    - Almost all real system have been modelled and are working as the real thing is
    - Flight dynamics modeled 99% close to real airplane
    - DDIS (Dynamic Drag Index System)
    - Fully functional APG-30 radar with target lockon and target range information
    - Aircraft configurator for payload and refuelling
    - Air refuelling in both single and multiplayer mode, in single player a KC-135 tanker can be called during flight
    - Payload fully congruent in both single and multiplayer mode
    - Aerodynamic pitch up and inertia coupling reproduced
    - Payload drop actually changes airplane weight, balance and drag index (DDIS)
    - A-4 gunsight system reproduced:
    * Manual and automatic bombing system
    * Rocket launch
    * Air to air gun firing with manual and auto range using APG-30 radar
    * Continuosly computed lead angle for gun firing
    - Special weapon delivery system LABS (vACMI only)




    WEAPONS ON MULTIPLAYER
    - Model runs nicely on multiplayer, it loads, drops/launch MK83/Rockets/Gun, weapon drop/blast and missile launch are visible both in single and multiplayer mode with no or negligible server clogging, tested and verified with up to 15 players and weapons.


    OTHERS
    Model comes with complete docs:
    - Normal/weapons procedures checklists
    - Real aircraft manual
    - Other useful docs
    - Support forum account
    - All version upgrading and patches at no cost.
    - Full detailed paint kit available for painters (It will be published later)
    - GPL (restricted) licensed


    RELEASE NOTES:


    • Minimum system requirements:
    • Prepar3D version 4.x
    • Same as required by P3D v. 4
    • 2.5 Gb of disk space
    • Customers that want upgrade from previous FSX/P3D v2 or v3 can have a discount, open a ticket at this end, will receive a 15 € coupon, please attach a proof of purchase.

    Attached Images
    http://www.simskunkworks.com/store/images/ssw_sig.png

  2. #2
    There is a typo in htttp adress to SSW
    English is not my native language, so please be generous if I write funny things :-)

  3. #3
    Quote Originally Posted by maikchaos View Post
    There is a typo in htttp adress to SSW
    Thanks,
    correct address is:
    http://www.simskunkworks.com

    /SSW
    http://www.simskunkworks.com/store/images/ssw_sig.png

  4. #4
    Can I get a coupon for the FSX version I bought and another for P3D V3 version I bought?
    Your English is better than my French, German, Italian, Spanish.... so no worries my friends!


  5. #5
    Quote Originally Posted by odourboy View Post
    Can I get a coupon for the FSX version I bought and another for P3D V3 version I bought?
    double jump ?
    can be done
    /SSW
    http://www.simskunkworks.com/store/images/ssw_sig.png

  6. #6
    Bongiorno amico,

    In your F84F for P3Dv4 announcement you state :

    Customers that want upgrade from previous FSX/P3D v2 or v3 can have a discount, open a ticket at this end, will receive a 15 € coupon, please attach a proof of purchase

    What does that mean ' at this end' ??.....

    I *think* i opened a ticket, 3 days ago, proof of purchase attached, but don't see any response. I only keep seeing " you have no support tickets of this type " ....

    What exactly does one have to fill in at " Please select a department for your support enquiry " ??..... What *kind* of department ??....

    I.O.W. a bit more information about how to get the discount for owners of the FSX/P3Dv2/3 F84F model would be very welcome.

    Ciao,
    Jan

  7. #7
    Also, Mario announced they are having a vacation this week (5 days) on their Facebook. Vacation ends today I thonk ;-)


    Sent from my iPad using Tapatalk

  8. #8
    What Am I missing

    once the engine has kicked over i get this small flame and white smoke and im 95% sure ive followed the guide for startup








    I turn engine crank off and engine starts to the centre pos and disconnect the GPU



    i'll be buggered if I know what missing

  9. #9
    Could be smoke trail from the Jato ?..... Possibly inadvertedly activated in the loadout menu ??....

    Btw, i still can't get that loadout menu to work correctly. Does it work consistently at your end ?...

    cheers,
    jan

  10. #10
    I can get the to load the weapons however i havent attempted to drop or launch them yet

    i will investigate JATO, im 99.9% sure its not fitted as its not visible however there might be some that is clickled
    Last edited by jeansy; July 15th, 2017 at 06:48.

  11. #11
    its as soon as I turn the battery on i get flames and smoke

  12. #12
    Use a default single engined aircraft first, make cold and dark, then switch to the Streak. I had similar problems in 3.4 and was advised to do it this way. Wait for the aircraft to be correctly initialized with voice confirmation.


    Sent from my iPad using Tapatalk

  13. #13
    thanks, i try that and got the voice on loadup however i still get that smoke after a cold and dark piper cub

  14. #14
    Quote Originally Posted by jeansy View Post
    thanks, i try that and got the voice on loadup however i still get that smoke after a cold and dark piper cub
    Quote Originally Posted by jeansy;
    will investigate JATO, im 99.9% sure its not fitted as its not visible however there might be some that is clickled
    some effect are linked to lights, be sure to turn off lights on cold&dark default file.
    Also a double "L" stroke should remedy.
    ATO are ok and working pretty well,
    Procedure on \docs\F84F.WPSPECOPS.CL.pdf, page 12
    there is also an ATO Take-off chart in \docs\F84.NormalProc.CL.pdf, page 18
    Pilots were used to read and know procedures checklists for their safety.
    /SSW
    btw:
    we have a pretty fast help desk, the better way to get support
    http://www.simskunkworks.com/store/images/ssw_sig.png

  15. #15
    Quote Originally Posted by SSW1 View Post
    some effect are linked to lights, be sure to turn off lights on cold&dark default file.
    Also a double "L" stroke should remedy.
    ATO are ok and working pretty well,
    Procedure on \docs\F84F.WPSPECOPS.CL.pdf, page 12
    there is also an ATO Take-off chart in \docs\F84.NormalProc.CL.pdf, page 18
    Pilots were used to read and know procedures checklists for their safety.
    /SSW
    btw:
    we have a pretty fast help desk, the better way to get support
    Thanks that fixed it

    I tried to log into the SSW forums, however it keep asking me to log in, my portal account didnt work and there was no where I could see to register a forum account

    any indication other than "will follow" when the paint kit will be released

  16. #16
    Matt, there is no need to enter the forum for help. Use the "Helpdesk" function in the main site to register your question, right next to "Home". The reply is usually fast.

  17. #17
    Quote Originally Posted by jeansy View Post
    ok, there you go another case of domestic blindness, its starring you right in front of you but you cant see it

    Thaks Daf for the intinal point in the right direction

    thanks SSW for the correct guidance


    Who me? I'm Dag :-P


    Sent from my iPad using Tapatalk

  18. #18
    Quote Originally Posted by DagR View Post
    Who me? I'm Dag :-P
    Well, "F" is right next to "G" so...

  19. #19
    Quote Originally Posted by DagR View Post
    Who me? I'm Dag :-P


    Sent from my iPad using Tapatalk
    yep the usual fat fingers and failing to proof read



    Has the paintkit for this been released yet?

  20. #20
    Quote Originally Posted by jeansy View Post
    yep the usual fat fingers and failing to proof read



    Has the paintkit for this been released yet?
    Yes it is, available from SSW support forum
    /SSW
    http://www.simskunkworks.com/store/images/ssw_sig.png

  21. #21
    I'm going to buy this because I love the F-84 and it looks sooooo well done.

    But just dropping out there that you can sell it to me a second time if you do a DCS version. Many, it would be awesome to fly this plane in that sim instead of messing with lame combat add-ons for the FSX descendants.

  22. #22
    Quote Originally Posted by SSW1 View Post
    Yes it is, available from SSW support forum
    /SSW
    Cheers i will have to have another look for it

  23. #23
    sorry I cant find the paintkit

    can you post a link please

Members who have read this thread: 1

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •