Hey Milton, sorry it took me so long to get back to you on this but RL cropped up it ugly head last week and I just now got the chance to scope these out. The prop hubs look great and the ADF antenna shadow is much better distributed. Thanks. I'll have an update screen shot or two with wings maybe by tonight after another chipped paint party!
Duckie
"I hate to see you go, but I love to watch you leave!"
Intel i9-9900K; Noctua NH-D15 Chromax Cooler; Gigabyte Z390 Aorus Pro WiFi;
ASUS Dual RTX 2070 Super OC EVO; Corsair Vengeance LPX 32 GB 3200;
WD Black 500GB PCIe M.2 SSD; 3 Samsung 860 EVO SSD; WD Black 2TB HDD;
Corsair RM 850x Gold Full Modular PSU; Phanteks P600S Mid Tower; Win10 Pro
My SOH Downloads: http://www.sim-outhouse.com/sohforum...d=79620&sort=d
Finally finished chipping paint on the wings. Took a while to get the leading edges to look OK. Lots of stretching going on there so it was go big or go home. Didn't look right going home so I went big! Need to do a little chipping on the H-tails then start on really messing up that paint with some streaking.
Duckie
"I hate to see you go, but I love to watch you leave!"
Intel i9-9900K; Noctua NH-D15 Chromax Cooler; Gigabyte Z390 Aorus Pro WiFi;
ASUS Dual RTX 2070 Super OC EVO; Corsair Vengeance LPX 32 GB 3200;
WD Black 500GB PCIe M.2 SSD; 3 Samsung 860 EVO SSD; WD Black 2TB HDD;
Corsair RM 850x Gold Full Modular PSU; Phanteks P600S Mid Tower; Win10 Pro
My SOH Downloads: http://www.sim-outhouse.com/sohforum...d=79620&sort=d
Duckie, having studied and done this weathering on models during my modelling days, I must say this looks extremely well done!
Duckie
"I hate to see you go, but I love to watch you leave!"
Intel i9-9900K; Noctua NH-D15 Chromax Cooler; Gigabyte Z390 Aorus Pro WiFi;
ASUS Dual RTX 2070 Super OC EVO; Corsair Vengeance LPX 32 GB 3200;
WD Black 500GB PCIe M.2 SSD; 3 Samsung 860 EVO SSD; WD Black 2TB HDD;
Corsair RM 850x Gold Full Modular PSU; Phanteks P600S Mid Tower; Win10 Pro
My SOH Downloads: http://www.sim-outhouse.com/sohforum...d=79620&sort=d
Thanks for the suggestions Milton. To be sure the H- tails will be lightly weathered. As far as the gun pods, l'm going to give it another go but they are tougher than the wing leading edges. Most of the chipping I've tried there looks more like smears than chips but I'm not done yet.
Duckie
"I hate to see you go, but I love to watch you leave!"
Intel i9-9900K; Noctua NH-D15 Chromax Cooler; Gigabyte Z390 Aorus Pro WiFi;
ASUS Dual RTX 2070 Super OC EVO; Corsair Vengeance LPX 32 GB 3200;
WD Black 500GB PCIe M.2 SSD; 3 Samsung 860 EVO SSD; WD Black 2TB HDD;
Corsair RM 850x Gold Full Modular PSU; Phanteks P600S Mid Tower; Win10 Pro
My SOH Downloads: http://www.sim-outhouse.com/sohforum...d=79620&sort=d
Looking really REALLY GOOD Steve!!!
MACH 3 DESIGN STUDIO
Heatblur Rivet Counting Squad™
Just when you think it couldn't look any better Steve puts up another pic. Great work.
Regards, Tom Stovall KRDD
Also, the aerodynamics of the airflow are such that the H-Stab is likely not going to chip as much as leading edge anyway. Look at Milton's 3rd photo. The H-Stab is virtually untouched.
MACH 3 DESIGN STUDIO
Heatblur Rivet Counting Squad™
Thank you, Tom and Rick, for your encouragement.
Agreed Rick. A closer look reveals some very small blemishes on the LEs and the big one on the starboard LE appears to be a patch. Also, There may be some hope yet with the gun pod chipping. The trick is working around the stretched areas and still make it look right. It'll get there, probably take few mulligans, but it'll get there.
Out of pocket for the next couple days. So probably have some gun pod and h-tail updates by the weekend.
Duckie
"I hate to see you go, but I love to watch you leave!"
Intel i9-9900K; Noctua NH-D15 Chromax Cooler; Gigabyte Z390 Aorus Pro WiFi;
ASUS Dual RTX 2070 Super OC EVO; Corsair Vengeance LPX 32 GB 3200;
WD Black 500GB PCIe M.2 SSD; 3 Samsung 860 EVO SSD; WD Black 2TB HDD;
Corsair RM 850x Gold Full Modular PSU; Phanteks P600S Mid Tower; Win10 Pro
My SOH Downloads: http://www.sim-outhouse.com/sohforum...d=79620&sort=d
Gun pods and H-Tail paint chipping are done. Gun pods are as good as I can get them due some extreme stretching in several places.
Now on to the final round of weathering by adding grime and oil streaking. Not long now before Punkin' will be ready.
Duckie
"I hate to see you go, but I love to watch you leave!"
Intel i9-9900K; Noctua NH-D15 Chromax Cooler; Gigabyte Z390 Aorus Pro WiFi;
ASUS Dual RTX 2070 Super OC EVO; Corsair Vengeance LPX 32 GB 3200;
WD Black 500GB PCIe M.2 SSD; 3 Samsung 860 EVO SSD; WD Black 2TB HDD;
Corsair RM 850x Gold Full Modular PSU; Phanteks P600S Mid Tower; Win10 Pro
My SOH Downloads: http://www.sim-outhouse.com/sohforum...d=79620&sort=d
Any plans on doing a model with out guns and turrets?
FAA A&P, FE (TURBOJET),AMEL COMM INST DC-8 & B767/757 TYPE RATEINGS
FCC GROL
It look incredible Steve! Very well done It looks very natural, which is always difficult to achieve.
Cheers,
Huub
Duckie
"I hate to see you go, but I love to watch you leave!"
Intel i9-9900K; Noctua NH-D15 Chromax Cooler; Gigabyte Z390 Aorus Pro WiFi;
ASUS Dual RTX 2070 Super OC EVO; Corsair Vengeance LPX 32 GB 3200;
WD Black 500GB PCIe M.2 SSD; 3 Samsung 860 EVO SSD; WD Black 2TB HDD;
Corsair RM 850x Gold Full Modular PSU; Phanteks P600S Mid Tower; Win10 Pro
My SOH Downloads: http://www.sim-outhouse.com/sohforum...d=79620&sort=d
It looks like your team is making great progress! How much more is there to do before it will be ready to release?
Joe Cusick
San Francisco Bay Area, California.
I am serious, and stop calling me Shirley.
The Marauder project, as you may recall, is an open project I released after doing my part of it. I continue support for any issues with the model or mapping.
I did not have a team for the Marauder project start; just me.
The project is now in the hands of anyone who wishes to paint it, modify it in any way, and release a full package as a finished project.
The exterior textures these days have much more detail, and lots of more complex texturing options, so they require more time and effort.
The artists who are working on paint schemes are not part of my team, but part of the SOH team who contribute their talents to the enjoyment of us all.
With that said, there is not really a project coordination effort by me. Yes, I could volunteer to do that if desired or necessary.
If anyone has completed interior (including panel and cockpit) and exterior textures and possibly other changes to sound, flight model, effects, gauges, whatever, and would like me to do the packaging and release, I would be happy to do that.
Hope that helps clear any confusion.
Bookmarks