HMS Ark Royal R07.zip
Results 1 to 8 of 8

Thread: HMS Ark Royal R07.zip

  1. #1

    HMS Ark Royal R07.zip


    A new entry has been added to Add-Ons Library, category FSX Ships

    Description: This model depicts the Royal Navy invincible class aircraft carrier HMS Ark Royal in a typical configuration during her 2010 deployment.

    Ark Royal differs from Invincible and Illustrious in that her ski jump was designed with a 12 degree ramp from the outset, along with the use of Phalanx instead of Goalkeeper CIWS. In her later years Ark Royal received a different communications fit from either Invincible or Illustrious as can be seen in the design of her third "mast" to the rear of the island. All three carriers are equipped with two GAM-B01 20mm guns from Oerlikon-Contraves and BAE Systems

    This model was originally designed in sketchup, to which I have since ported into Blender. As a result although she is a marked improvement on my earlier invincible class models there are still some anomalies with texturing.

    Tested in FSX Acceleration only.

    To check it out, rate it or add comments, visit HMS Ark Royal R07.zip
    The comments you make there will appear in the posts below.

  2. #2
    Hi Gary,

    I'm trying to put TACAN together for this within AICarriers.
    Did you pre-configure?

    RFN TACAN Gauge suggests 17X but I think that's for an older Ark.

    Please help, keep having to ditch the Harrier in the Channel and swim back to Culdrose after another unsuccessful locating attempt!

    Ganter

  3. #3
    Quote Originally Posted by Ganter View Post
    RFN TACAN Gauge suggests 17X but I think that's for an older Ark.
    Whether you have an older Ark Royal or not you can make the RFN TACAN Gauge work with this version one using the same 27X (109.00).
    Simply edit the section in the "\Gauges\RFN_Carrier.xml" file to point to this one based on the sim.cfg title line.
    In this case change Sim_Name="Ark_Royal" to Sim_Name="HMS Ark Royal 2010".
    Hope this helps.

  4. #4
    Quote Originally Posted by fsafranek View Post
    Whether you have an older Ark Royal or not you can make the RFN TACAN Gauge work with this version one using the same 27X (109.00).
    Simply edit the section in the "\Gauges\RFN_Carrier.xml" file to point to this one based on the sim.cfg title line.
    In this case change Sim_Name="Ark_Royal" to Sim_Name="HMS Ark Royal 2010".
    Hope this helps.
    Just done it!

    You're a star mate. Many, many thanks.
    Now, off to fly in this filthy weather over the Channel but at least I'll be able to find the ruddy barge.

  5. #5
    That's a nice model. Now we just need a plane guard Merlin or whatever they would use.

  6. #6
    Quote Originally Posted by fsafranek View Post
    That's a nice model. Now we just need a plane guard Merlin or whatever they would use.

    It is now I can find it!



    Got a Sea Hawk performing those duties at the moment but that seems a little wrong!

  7. #7
    'tis unusual to see a R.N. carrier with actual aircraft on board.
    Intel i5-10600K 4.10 GHz 12 Core CPU
    Asus ROG Strix Z590-E Gaming LGA1200 Z590-E Motherboard
    Corsair Vengeance LPX 32GB (4 x 8GB) DDR4-3200 Memory
    Water Cooler - CORSAIR iCUE H100i RGB PRO XT
    Corsair 850W PSU
    MSI RX580 Radeon Armor 8Gb
    Windows 10 Home Premium 64
    3 x 21" Acer LED screens

  8. #8
    Quote Originally Posted by Naismith View Post
    'tis unusual to see a R.N. carrier with actual aircraft on board.

    Oi, you cheeky beggar!


Members who have read this thread: 0

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •