Ssw harrier 3.3.0 for p3d released - Page 2
Page 2 of 3 FirstFirst 123 LastLast
Results 26 to 50 of 60

Thread: Ssw harrier 3.3.0 for p3d released

  1. #26
    Quote Originally Posted by Victory103 View Post
    +1 here, held off as I already had one AV-8 with releasable weapons. I'm becoming more of a Tacpack snob, so your model looks to fill that gap with this unique aircraft. I'm running your Tornado to, so I would have maps.

    On the vACMI program, was this made by your coders?
    Yep,
    same C programmers make both planes dll and vacmi dll client.
    /SSW
    http://www.simskunkworks.com/store/images/ssw_sig.png

  2. #27
    Quote Originally Posted by menef View Post
    Hi SSW!!! Du you have increased the minimum system requirements for this upgraded Harrier? Thank you
    No,
    same requirements for all SSW models.
    /SSW
    http://www.simskunkworks.com/store/images/ssw_sig.png

  3. #28
    Btw. SSW AV-8B II version 3.3.1 for FSX has been published.
    Webmaster of yoyosims.pl.

    Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro

  4. #29
    Hi ! If you buy it, how many time did you expect the code ? Mine is awaited since 12 hours, which is probably normal, but I'm afraid it could be lost in some spam box...

  5. #30
    I don't remember for sure, but I think the codes at SSW are generated or validated by a human person, which means it could take a while during the weekends...

  6. #31
    SOH-CM-2023
    Join Date
    Jun 2005
    Location
    Netherlands
    Age
    65
    Posts
    1,232
    Blog Entries
    1
    On theirwebsite they say that it may take a maximum of 48 hours. Add a day to that forunforeseen troubles, to give them a little leeway, I would say, to be on the safeside.

  7. #32
    Ok, thanks. Since I received any mails from SSW in the buying process (only from pay pal), I feared that the reponse to the susequent activation request could be lost...

  8. #33
    I have to say again. This is great plane, it looks good, has a nice VC, working radar, moving map display, working weapons, and a smooth FDE allowing trouble free VTOL operations. It may be the most complete Harrier experience available and deserves more attention.

  9. #34
    It's been over 48 for me, but I'm ok with the wait over the weekend. Even with the pauses and missing textures, the model looks the part.
    Fly Navy/Army
    USN SAR
    DUSTOFF/ARMY PROPS

  10. #35
    Request at 21:00 yesterday, key received today at 15:30. Fair.

  11. #36

    Ssw activation key sending procedures

    Good evening everyone,
    we would like to explain the procedure by which the activation keys come to you
    1. You buy the software
    2. You have the download link in your account under "View my orders"
    3. Download the software, many of the models that we produce are distributed in two installers:
    - One contains the core files and that's what you buy
    - Another contains the textures and liveries, the link to the download is free and obtainable on the page that describes the model itself
    4. You install the core files, the installer shall ask you if you want the activation key (you may already have it)
    5. The installer sends us the registration file tailored on your computer, typically the name contains ssw.<model name>.probe.ssw
    6. We generate the key manually and dispatch it to the email address you entered into the installer prompt.
    This process takes some time, sometimes it ends within minutes, sometimes even a day, depending on the time zone and office hours.
    Although we continue to generate keys every day including Sunday there may be delays, of this we apologize.
    Quite often it happens that email providers block our attachments containing the activation key for no reason and without notifying you, for this reason we ask you to immediately open a ticket on the help desk if you have not received the key within 48 hours, we will to attach the key to the ticket you opened.
    Thank you
    /SSW
    http://www.simskunkworks.com/store/images/ssw_sig.png

  12. #37
    Quote Originally Posted by wapanomi View Post
    Request at 21:00 yesterday, key received today at 15:30. Fair.
    Allright wapanomi,
    however is strange you did not receive any confirmation mail from our site, e-commerce software generates an invoice and a confirmation message as soon as you complete purchasing process.
    Regards
    /SSW
    http://www.simskunkworks.com/store/images/ssw_sig.png

  13. #38
    Hi SSW1,

    I purchased and installed on Feb 5. Did not receive a key by the end of the week so went to the website and sent an email with info as described in the FAQ. The email was sent 2/10.

    Still have not gotten an activation key.

    What else do I need to do?

  14. #39
    Quote Originally Posted by henrystreet View Post
    Hi SSW1,

    I purchased and installed on Feb 5. Did not receive a key by the end of the week so went to the website and sent an email with info as described in the FAQ. The email was sent 2/10.

    Still have not gotten an activation key.

    What else do I need to do?
    Hi henrystreet,
    most probably key was sent as attachment but blocked by mailer or mail provider somehow.
    Open a ticket into our help desk, we will attach your key there.
    apologize for the inconvinient.
    /SSW
    http://www.simskunkworks.com/store/images/ssw_sig.png

  15. #40
    Hi everyone !

    I'm very surprised by the general shape of the 3d model, much better than the first 2012 version that I tested, and imho even better than the competiton, which is very good. That's a very good surprise. It's not the same with the cockpit, hugely improve, but not at such an extend. That said, that's a very good cockpit.

    I've some installation problems, and I do not find an installation documentation, just some docs with flight procedures. My first concern is that I must validate two dll's at each launch : first at the launch of fsx, second for the flight itself. Each time... I suppose it's not normal. I made a reinstall, with version 3.3.2, but still have the problem. An other problem is that at some point the flight pauses.

    My first supposition is that I've missed something. Does someone have a suggestion before I go to the SSW support ?

    Thanks !

  16. #41
    Quote Originally Posted by wapanomi View Post
    Hi everyone !

    I'm very surprised by the general shape of the 3d model, much better than the first 2012 version that I tested, and imho even better than the competiton, which is very good. That's a very good surprise. It's not the same with the cockpit, hugely improve, but not at such an extend. That said, that's a very good cockpit.

    I've some installation problems, and I do not find an installation documentation, just some docs with flight procedures. My first concern is that I must validate two dll's at each launch : first at the launch of fsx, second for the flight itself. Each time... I suppose it's not normal. I made a reinstall, with version 3.3.2, but still have the problem. An other problem is that at some point the flight pauses.

    My first supposition is that I've missed something. Does someone have a suggestion before I go to the SSW support ?

    Thanks !
    Yes,
    go to SSW help desk, is the quickiest way, we cannot assure a constantly watching of SOH forum.
    regards
    /SSW
    BTW
    Detailed installation instructions are on the site under the left column menù "HOW TO..."
    http://www.simskunkworks.com/store/i...all-our-models
    Last edited by SSW1; February 16th, 2017 at 04:34.
    http://www.simskunkworks.com/store/images/ssw_sig.png

  17. #42
    No joy. Even get error notice trying to get an activation code.

  18. #43
    Quote Originally Posted by Corvette99 View Post
    No joy. Even get error notice trying to get an activation code.
    Hi Corvette,
    sometime happens that some system is misconfigured, especially if it is WIN10 with wrong or misconfigured writing permission on sim root folder.
    We suggest to strictly follow instructions on:
    http://www.simskunkworks.com/store/i...all-our-models
    and take a read of FAQ here:
    http://www.simskunkworks.com/store/i...-help?view=faq
    And as usual use the help desk, is the fastest and easiest way to get support.
    regards
    /SSW
    http://www.simskunkworks.com/store/images/ssw_sig.png

  19. #44
    Guys, to my experience, any issue with SSW products, either activation or other is promptly addressed and solved via the helpdesk. They can not offer prompt assistance here as they can not monitor all posts. It seems that the somewhat complicated SSW activation procedure is the main subject of discussion in every thread about their products and their true value is not given the attention it deserves. I admit myself that I hate having to wait at least a day to be able to use my purchase, but a little patience never hurts, if this is the way they decided to protect their work.

    Anyway, here is a short video of landing the AV-8B on Aerosoft's Kitty Hawk. Not a standard carrier and not standard flying, approach and landing procedure, just having fun:

    https://youtu.be/MAfDh_PFoLg

  20. #45
    Quote Originally Posted by Dimus View Post
    Notice only than in real procedures for Harrier pilots never landing on carrier deck looks like this. The approach is from the right side (with the same speed in the final approach), not direct to carrier.
    Your video reminds me my old movie with Razbam model:



    btw. haven't yet this new model of SSW but it's on my priority list as "must to have" model in my hangar
    (Im waiting for new version of TacPack for P3Dv3 with hotfix3, not yet from VRS).

    My wallet must take a little breath but this SSW new Harrier looks so good : )))) !

    Webmaster of yoyosims.pl.

    Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro

  21. #46
    That's why I said "non standard approach" Yo-Yo.

    I've done the standard approaches using the Ark Royal model. It is far more realistic as the deck is not angled and one can apply the sideways landing technique.

  22. #47
    This colud be nice for this: LHD-2 done by DeltaSimStudio.



    http://www.deltasimstudio.com/lhd.htm , but the price (for AI) is the cosmos ;>.
    Webmaster of yoyosims.pl.

    Win 10 64, i9 13900 KF, RTX 4090 24Gb, RAM64Gb, SSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5 [MSFS, P3Dv5, DCS, RoF, Condor, IL-2 CoD/BoX] VR fly only: Meta Quest Pro

  23. #48

    Icon9

    unfortunately they sent me a refund instead of an activation code.

  24. #49
    Hi Corvette,
    the refund of 0.1 € was done since is the only way we have to get in contact to you.
    Did you read the message in refund notice ?
    It said:
    Since long ago comcast.net refuses all our mail with:
    "processed by the mail server: <hidden>@comcast.net; Failed; 5.1.2 (bad destination system address) Remote MTA mx2.comcast.net: network error"
    please open a ticket on our help desk.
    Because we knew that you had not received the key wanted to contact you in some way, we thought our effort was appreciated...
    apparently it did not happen :-(
    regards
    /SSW
    BTW:
    Still waiting an help desk ticket to be opened, is the only way to contact with you.
    http://www.simskunkworks.com/store/images/ssw_sig.png

  25. #50
    That message did not appear in the refund email I recieved . I was able to get a help ticket put in. Thanks , Ive been looking forward to a good Harrier !

Members who have read this thread: 0

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •