Thank you Sir :salute:
The bomb bay doors should open using the second door or rear canopy key sequence. It has not worked on mine but I usually have trouble with the shift+e, 2 openings.
Printable View
Outstanding Uncle Milton:applause:
To those painting these aircraft, I'll need revised schemes for when I redo the FSX conversion on the entire lineup.....I hate flying with wireframes:icon_lol:
I will be sending the S2F-3 package to Smoothie and simkid22 today. The mapping is very similar in layout to the E1B but lots of differences obviously.
I have the basic flight model ready for the S2Turbo. I will ask Fliger to check it out before sharing.
@euroastar350, I will package up the models for you today.
Okay, I seem to have the turbo settled down, and breathing better with the new exhausts.
Temporarily using KA350 sounds and 2D panel.
Also adjusted the ladder to be shorter.
I do need a better prop texture; this one was small and blurry.
Milton:
Will send you a revised S2 airfile , probably today. In the S2 docs I have there is no performance data, but the Willy Fudd data should be a good start with the revised weights etc, will just reduce the CD0 a bit.
Hawkeye: Suspect that the yaw and roll couple, but will ask if I run into any of the S2 drivers.
Cheers: T
Milton:
In attempting arested landings in FSX (accel) I get no hook engagement, I don't see any significant erros or omissions as compared to say the F7F in the cfg file.
Any ideas?
T
I've been researching information and pics of the turbo prop variants for awhile. There appear to be basically three main turboprop variants.
1. The Marsh/IAI version Milton has done, which was used by the Argentine Navy. (the only military user of this variant) This version retained the vibration damper on the left horizontal stab and was converted from the long fuselage and long stabilizer S-2E/G Tracker. In my previous post, I included a pic of the prototype in USN markings still.
2. The Marsh tanker conversion used by the CDF, most of which appear to be converted S-2E/G Trackers. Notably, the CDF birds do not have the vibration damper on the left stab. This would be a de-militarized version of Milton's bird with a more pointy nose cap and pointy chromed spinners. Marsh also converted a few S-2A's to Turbo Tracker configuration as tankers, which retained the S-2A stabilizers.
3. The Grumman conversion used by the Taiwanese forces, which used the same engine (Garrett) as the Marsh conversions but had a 4 bladed prop and different exhausts. The nacelle is similar to the Marsh conversion. Notably, these didn't retain the searchlight.
4. The Conair conversions which used the PT-6 engines with 5 bladed props. This engine has exhausts on both side of the nacelle near the front (due to the PT6 being a reverse flow engine, inlet at the aft end and exhaust at the front). These were conversions of CS2F's and S-2A's with short fuselages and stabilisers. These appear to have retained the vibration dampers on the stabilizer. These also have the more pointed nose cap.
Just putting this out there to help clarify versions and available color schemes, especially for the version Milton has produced. Information is good!
Dave
I see that you got this corrected. :)
Thanks Dave; I used a prop from your first picture originally but it is too small for any clarity.
Thank you Dave; great stuff here. I appreciate all your efforts in research. :)
I plan to do the first and second versions, maybe the fourth. The first military conversion looked easiest to do so that is the start for me.
Based on videos I have seen, the wing fold ops are very slow. When I mimmick this in the sim, it makes the folding ops jerky.
1. Does anyone know how to improve this with gmax animation changes?
2. If you want to smooth out the folding ops, you can speed up the process by changing these parameters in the aircraft.cfg:
[folding_wings]
wing_fold_system_type = 4
fold_rates = .02,.04
Numbers like .2, .3 (% per second per wing (left,right I think)
Some have asked about the pilot figures.
JAVIS is working on replacements for both.
I am working on "disappearing xml code" (Thank you Lionheart) to make them disappear at your discretion.
JAVIS has the gmax source to start the S2F-1. Thank you Sir for doing this one. :applause:
Regarding wing lights, not the best as they are gmax lights required because folding wings cannot use effects lights.
I have sent euroastar350 the gmax source for the FSX native conversion. :running:
I have sent Fliger the new S2T model to check out the flight model. :kilroy:
Does anyone have performance data for the S2T military version?That would be a great help.
We are awaiting the E-1B paint kit from Smoothie and simkid22; shouldn't be long. :mixedsmi:
I sent simkid22 the materials to build the same for the S2F-3. These guys are really busy so we should be patient.
Nigel has created an awesome sounds package. I think you will love this one. :applause:
Regarding sounds for the S2T, I borrowed the KA350 sounds for testing but I hope we can do something better. They may be realistic (if so, okay) but if not, ... maybe someone can recommend something else.
Does anyone have credible performance data for the S2F-3? Fliger could use it to tweak the FM.
Thanks to all of you for your interest and support. :applause:
little more work done tonight
Attachment 49546