Originally Posted by
Dev One
My two pennorth,
Very good modelling, Nice FDE Pam, but I'm suffering from jitters on the deck & prop rotation with everything switched off.
Take off OK, but almost no rudder effect on ground or in flight, & also get jitters in level flight. Cannot understand why one must pull pitch lever back at about 300 mph as well as throttle, AFSD shows prop pitch about 23 degrees at 300 mph & not much more at 400 mph - & then advance again to get through the brick wall - got it to 400 mph. Landed OK full flaps etc & spoiler, then switched off engines using M-, props stopped then reversed direction. Did notice the the dirt throws up about 18" aft of each wheel. So jitters might be two things, 1) incorrect contact points, but 2) more likely to be MoI related as noticed in aircraft cfg a very, very large yaw value compared to the pitch value.
I don't like to denigrate your work Pam as I know from experience how difficult FDE can be, so please take this as positive criticism.
BTW I got jitters on an addon Biggin Hill as well as standard Heathrow using FSX SP2.
Keith