Ian Warren
SOH-CM-2013

Thanks for the link fallenphoenix1986 :cool: .. 13 minutes into the film .. landing the Tracker on the deck seemed so docile, I'll post this at www.nzff.org , i no people will be very interested as well . <input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden"><input id="gwProxy" type="hidden"><input onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">

Yeah as Warhorse said wheres the barbeque , I would'nt mind sticking my nose in and have a look :icon_lol:<input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">

It really is a superb aircraft model , noticed in the video post just how quickly it really jumps off the deck , it would have been very interesting read had the type gone into actual fighter v fighter against the best of the period , that stage tho was already set but still to take one for a ride it is the best FS model. <input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">

In short open the texture file in Martin Wright's DTX1 bitmap manipulator and export the alpha channel as a bmp file. Darken this bmp file in a photo editing program and import it again in the original bitmap. Make back-ups and adjust the shade of the bmp file until you are satisfied. A trick of 5 minutes, not more when you are familiar with the process. It might need a bit longer when you need to learn the process (but make sure to make back-ups!). Martin Wrights Graphic tools can be found here: http://www.mwgfx.co.uk/ (you will need DTXbmp). Good luck, Huub

I'm glad the BananaBob prop is already an improvement. Darkening the alphas will reduce the problem further, but doesn't fully solve it. Huub

This from Deano at Vertigo Studios forums Still a brilliant little aircraft :cool: <input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden"><input id="gwProxy" type="hidden"><input onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">

Hani , have it d/loaded and to install this morning , very much looking forward to it , think a special presentation require gluing both yours and Rafal's "YOYO" together :applause:....... :icon_lol: < spose to be a big wide grin <input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">

Rick , I have it ... you don't need to have much wing with this one ... it all bloody propeller :icon_lol: serious fun ... <input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden"><input id="gwProxy" type="hidden"><input onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">

I have seen your request, but I have nearly all native FSX Warbirdsim P-51s installed so there is no real reason for me to install Wozza's FS9 P-51 in FSX. As most of our members live on the other side of the pond (at least for me), most of our members haven't seen your request yet. So I suggest to wait for at least 12 more hours to see whether there is somebody able to help you. If not I will install Wozza's Stang (tomorrow) and do an attempt to create something. Remember; patience is a virtue....... and help is something which is offered, but there is is no right to demand it. Cheers, Huub

In weightlessness it is difficult to move heavy things. The force to start the movement will be equally large on your body. When you want to stop the movement you will have to apply force again which will also make your body move. That's why the Belgian and Dutch have developed a sort of camera tri-pod which can be mounted in the cupola from the International Space Station. In the place where I work we have a clean room in which all items which will be introduced in the European part from ISS will have a fit and compatibility check, before they are moved to ISS. When I was in this cleanroom in December last year I discovered the tri-pod which will be mounted in the cupola to support the cameras. With some imagination you see the shape of a half cupola with the bracket mounted. There is no camera on the bracket. I assume this item has been taken to ISS by the European astronaut Luca Parmitano last May. So you can expect better quality pictures due to some Belgian and Dutch engineering.... Cheers, Huub

When it happens independent of where and what you are flying, the answer is yes..... It might also be a cooling/heat problem. You could try whether it improves when you take a cover from your PC.

Thanks for the HU Rick :cool:<input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">

Great Bunch of photo's .. Gawd! :eek: your not joking about that glider pilot "but an epic moustache for protection" love that :icon_lol: <input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">

There is no reason to become impolite. I would appreciate it if you could discuss inquiries about purchase details at the Milviz forums, by PM or by e-mail. I don't think it serves any purpose to see two people quarreling about something nobody else in interested in. Thanks for you understanding and cooperation, Huub

Amazing shots which were great to see. Thanks very much for sharing them. I must visit the collection myself over the summer. Thanks again, Ade

John I had to read this sentence twice...... you of all people!!! :isadizzy: :icon_lol: :icon_lol: Nevertheless very much appreciated in this case. Looking forward to your Harvards, Huub

Thanks for th3e HU Frank! Great news there are not many jet I fly, but this will definitely be one of them. Huub

Not sure Hani , but i believe this has to be released , finished let the AN-2 drivers decide or if not send a copy across to me and we will see what people think :wavey: <input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">

Listening to the sound i believe may have nailed it, the old Alphasim had the best sound set, well until the release of this we won't be able to tell, I grew up with the Harvard's right up to its replacement in 1977 and your ears tuned so well to the sound .. at school as they past in overhead a simple and mild hum, I finally got a flight in one in 2006 was one of the the last flights out off ex-RNZAF Wigram, i was told it was loud but frankly found it soothing, just a medium rumble and the typical clack of the radial . <input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">

Exactly what both Andy and Bruce said ... :applause: "Weathering Heights" i would say :cool:<input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden"><input id="gwProxy" type="hidden"><input onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">

Now at 12.36 18 June in Christchurch New Zealand .. that must make it about 13 days away :icon_lol: , only kidding - Make for one heck of a 4th July prezzie tho :cool:<input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden"><input id="gwProxy" type="hidden"><input onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">

All repaints shown in this thread can be found here: http://www.sim-outhouse.com/sohforums/local_links_search.php?s=&action=show&page=1&pp=20&sort=N&beforeafter=1&desc=1&ents=1&keys=1&literal=1&user=bomber_12th&childcats=1&sort=d

Hawkeye, The converted CFS2 version can be found here: http://www.sim-outhouse.com/sohforums/showthread.php?79111-Fokker-T-5-zip The FS2002/FS2004 version is available at flight name under the name fk_tv.zip Cheers, Huub

Hi Jens I was indeed referring to the titles on the fuselage. It might be worth to try a bit texturing these letters, for instance some spickles, to make them look "less present" a bit. But as I already said a very interesting repaint, which will definitely find a place on my hard disk! Cheers, Huub

Hells Bells Hani :cool: were getting so spoiled with un-spot-less-ness :icon_lol: the work done on this is art ... well some people just don't look after there airplanes now do they . <input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">

Looking superb Gary , really is coming alive :cool:<input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">

YOYO Only a bit off weathering needed :icon_lol::icon_lol::icon_lol: ... that aircraft is so weathered you can almost see the previous registration <input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">

Thanks for the pictures Ferry, I enjoyed them! Funny to hear you never saw (or should I say "hear"") a Phantom in flight. When I was stationed at Soesterberg in 1978, 32TFS was still flying them. I think they were replaced by Eagles in 1980. Huub

Paul is a great guy. There is just one thing wrong about him..... He drinks the wrong brand of :icon29: Just kidding of course! Have a Grolsch! Huub

Jens I think you are still using the old spec maps. Either replace them by new ones or just replace them with all gray textures in the darkness corresponding with the gloss you want. Cheers, Huub

The main market for Adobe Photoshop is most likely professional photographers and publishers, I think for them there isn't much difference whether they need to buy an expensive program once in a while or work with a subscription. For us who are using these photo editing programs just as a drawing program it doesn't make any sense to pay a monthly fee. But We should alo realise that we are no market for Adobe. I will stick with my ancient Paint Shop Pro 7 version as long as my PC's operating system allows me. And after that I hope Gimp is still around..... Cheers, Huub

I'm sure Zsolt , Hani or Barnes would cover these but if not i'll jump in <input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">

Very interesting repaint. A great idea to make it! Cheers, Huub

Looking great Matt , "City of Christchurch" sweet :cool: .. Time , yeah i have to put painting aside to the mo . <input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">

Thanks for the nice pictures Lawman! Huub

Impressed to see the LIMBO mortar still getting used ? .. <input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">

Two striking civy's from the BB's Bruce and Barnsey :cool: Szolts could be used for a "Ribeena" brand Blackcurrent Juice advert :icon_lol:<input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden"><input id="gwProxy" type="hidden"><input onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">

JanKees, the country you live in now flew nice aluminium dope Harvards. They even had a demonstration team flying Harvards! Just to increase you appetite :icon_lol: Cheers, Huub

Guys the files are in the library and will become available as soon as Rami has approved them. Enjoy, Huub

Amazing work again John! You are truly a great artist! :salute: Cheers, Huub

Zsolt , along with your superb paints you also have a choice scenery that go's with them , for us down-unders could you post links for the scenery's you using :cool:<input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">

Sean , noticed a large selection posted for d/load on the Sibwings site :cool: <input id="gwProxy" type="hidden"><input jscode="leoInternalChangeDone()" onclick="if(typeof(jsCall)=='function'){jsCall();}else{setTimeout('jsCall()',500);}" id="jsProxy" type="hidden">