This is a modified panel for DCC's excellent P-38M night Lightning. It adds a fully-functional radar gauge courtesy of Eric Marciano. AIbridge is included.
Original panel created by DCC and radar gauge by Eric Marcino.Radar panel from the team KBT's P-3 orion. Visit their website at: http://flightinfo.ens.ne.jp/FS_KBT/ Created with FS panel.
by nightshade (2006-06-06 17:49:13)
PC-21 2D Panel.zip
A complete redo of the original panel packaged with Tim Conrad's awesome PC-21. While still not strictly adhering to the actual aircraft, this panel does allow for more side viewing than the original and I did use an actual 3/4 view of the actual cockpit to rework it.
by falcon409 (2005-07-21 15:39:33)
Heinkel He-51 panel with german gauges.zip
This is an alternative panel for the excellent Heinkel He-51 made by Classic Wings. I changed original gauges with KeDI gauges (not included). Model by Graig Richardson.
by SIAI S81 (2007-02-26 12:08:02)
Modified VC config for Joe Binka's Radial Widgeon.zip
Regauged with stock F6F and P-38 gauges and a few from Mopar Mike's MAPE_US4eng.gau set. Pop up windows for radio stack, gps, engine controls, and cd player. Regauging the radial Widgeon stops the engines from shutting down due to over heating...which only took a couple minutes to happen in my case.
FS2004 HUGHES XF-11 Full Panel_with_fix.zip
see here : http://www.sim-outhouse.com/sohforum...ad.php?t=35558 The original panel had not 2D panel and had not its minipanel. I created them. About the original VC, The original gauges are not changed, their position are not changed, I just completed it, with : - position of blades ( in english ? ) -- spoiler gauge; ( with sound, from DCC P-38 L, See after ) -- flaps gauge, -- gear gauge, -- six command icons, -- level engine push, -- sound brake gauge, ( invisible, from CFS2 Giacomazzi bf109e7t, See after ) -- mini autopilot. -- What you see on 2D panel, you see exactly the same on 3D panel. The minipanel is not exactly the same, but specific for this aircraft. enjoy ! Solobo ( Fr?d?ric Bourmaut )
Originally uploaded by solobo (2008-02-19 16:47:26)
Razbam Skyraider french civil panel.zip
Here are for RAZBAM's Skyraider the panel and repaint mods for the Skyraiders flown on the airshow circuit under french civil registration. Also I added a personal repaint and some minor mods to the aircraft.cfg and the airfile.
This 2D panel is an upgraded and more realistic version with completely new gauges for my C.R.D.A. Cant.Z.506A/C (506_ac01.zip). Created by Manuele Villa , November 2007. Installation instructions included.
by mvg3d (2007-11-05 02:24:45)
WoP P-47 IFR Popup Panel.zip
This is an IFR panel for the Shockwave WoP P-47. Shockwave decided with this release to have a "Mini" 2D panel for their P-47, with absolute minimum gauges. I guess you are supposed to fly from the virtual cockpit. I hate flying from the virtual cockpit, and like to "customize" my 2D cockpits. After many hours of fiddling, I think I came up with a good compromise cockpit. This panel provides a popup panel with all the gauges from the virtual cockpit panel plus some extras for instrument flying.
by Lightning-=BS=- (2005-10-13 15:57:55)
Sky Unlimited Me-262 2D Panel.zip
Since a Panel .bmp was posted, I went ahead and purchased the Me.262. Of course the gauges are XML so they don't work in the 2D panel, but I found the WoP Arado gauges are almost a perfect match, so I used them. Now I have a good working 2D panel. God I wish people would stop making VC only planes that I want so badly Anyway thanks to the developer for the 2D .bmp (needed some work, but ok now) Here is my version. Remember, you need the WoP Wings of Power package for the gauges, but you might want the panel.bmp even if you don't.
by Lightning (2006-06-11 11:36:52)
Fairchild FC-2W2 Panel Fix.zip
This is a quick panel edit of the FC-2W2. Same gauges used, I just melted the ice off the engine and added a GPS. New bitmap has the added bonus of being in color and matches the rest of this great aircraft. By gumbyum902, 2008-11-27 18:23:32
srdualcpt.zip (1.11 MB) (downloaded 557 times)
Dual Cockpits for the Alphasim SR-71. Retains Alphasim VC adds updates to the Original Cockpits by Peter Pellionis. Radar gauge by Eric Marciano used by permission. Requires Alphasim SR-71, the Original Pellionis panels, and FSUIPC. See Readme for further details.
by GZR_Sactargets (2003-12-03 16:19:43)
Lancair Legacy Panel Update.zip
This update to the FS2004 Lancair Legacy adds an Autopilot Input select switch to the 2D panel. This new switch is placed next to the aircraf's autopilot control panel. It allows you to tie in either the VOR or the GPS to the aircraft's autopilot. A detailed installation readme and updated panel screenshot JPEG are included. It is posted with written permission of the aircraft's designer, Robert Christopher.
by Ken Stallings (2003-10-05 11:21:03)
Antoinette 2D Panels.zip
2D Panels for Joe Binka's Levavasseur Antoinette, which comes without one. These 2D panels are made from a screenshot of the VC. There are two panels, one with the same instruments as the model's stock VC, and one (perhaps more authentic) with just two engine gauges (temperature and oil pressure) and a pocket watch stuck on the panel. The more primitive panel alters the VC panel to match. The enclosed aircraft.cfg file allows you to select either version from the Select Aircraft menu.
Fairchild 91 2D & VC Panel Upgrades.zip
A rework of the 2D and VC panels for Chril Herring's Fairchild 91. In the 2D panel the gauges have been rearranged for a better scan, and resized and relocated to fit into the bezels painted on the panel bitmap. A few items like a visible mag switch, and gear lever and flap levers have been added. In the VC the gauges have been raised up into a more realistic position on the panel, and the layout has been altered to match the new 2D panel. The viewpoint in the 2D cockpit has been elevated to parallel the aircraft's longitudinal axis so that you will be looking at the horizon when the plane's nose is pointed at the horizon.
by Mick (2007-01-20 18:13:11)
Bf108 Blank Vintage Panel and gauge for Tail Number.zip
Tail-number CAB gauge for Bf108 VC vintage panel, inspired by Brent Hricziscse aka "dogknot" brilliant Nnumber gauge for the 2D panel. Me108_Nnum_VC.CAB allows any tail number listed in the individual paints of the aircraft.cfg to display on the VC panel.
example: atc_id=N395A, atc_id=D-IHDD, etc. The included Bf_2.bmp is clear any painted Tail-number so each aircrafts individual number can display without having multiple panel folders.
Original upload by JG3Steffen (2008-02-13 18:56:52)
It's an optional panel cfg and two VC background .bmp files (for flying in VC mode only). Based on the original panel by Milton Shupe, Scott Thomas and Andre Folkers. Changes include reconfigured flight control modules at both sides of the panel and inserted radio stack panel.
Originally submitted by Vladimir Gonchar (2006-03-29 17:51:28)
SM.79 Gauge Fix.zip
Here is the Altimeter fix for mvg3d's excellent SM.79 Sparviero bomber, it corrects the positioning of the altimeter needle so it reads correctly, He made the fix, I'm just uploading it, I hope you guys enjoy his SM.79 bomber as much as I do!
By death_eagle_571, 2008-06-04 17:23:31
Me-262 2D Panel Bitmap.zip
A panel bitmap for those who would like to create their own 2D panel, for the Flight Replicas Messerschmitt Me-262A-1a. Does not include gauges.
by mike_cyul (2006-06-10 10:16:47)
Northrop Alpha Panel Upgrade.zip
A new panel.cfg file for Chris Herring's Northrop Alpha. It makes the gauges on the VC panel round, and on both the VC and 2D panels it rearranges the instruments to eliminate duplicates and put the primary flight instruments up in the pilot's view. This panel file uses all the same instruments as the original, except that I've substituted a clock for one of the duplicated engine instruments. As with the original, you will need the gauges from the FS2002 F4U-1A Corsair and Concorde, the CFS-1 P-47D Thunderbolt, and the FS9 F4U-7 by Alpha bleu Ceil in order to see all the instruments.
by Mick (2007-01-22 19:30:57)
Early Fairchild Panel Background FS9 & GW3.zip
A replacement panel background for the early Fairchild series by James Hefner and Jim Douglass, made by Mick from a screen shot of the VC. It will melt the ice and snow off of the exhaust system. By Mick, 2008-12-12 20:58:26
You can download third-party Add-Ons that Sim-Outhouse indexes on its sites, but please remember that Sim-Outhouse does not create, endorse, or sponsor the Add-Ons. If you download any third-party materials that Sim-Outhouse indexes or posts, you do so completely at your own risk. If you plan to download any Add-Ons, please be sure to read the copyright and licensing information first. If any Add-On is reported to sim-outhouse.com to have either pornographic material, viruses or copyright violations we will immediately remove the Add-On.