PDA

View Full Version : Uncle Milton's XP-47H ...now released!



UncleTgt
November 13th, 2014, 00:26
In my new role as Pepe's warm up guy:dog:, I present to you some screenshots of Milton's Shupe's XP-47H converted for CFS 2.

UncleTgt
November 13th, 2014, 00:29
Largely based on Steve Bryant's comprehensive paintkit.

What if the XP-47H had been developed earlier & deployed to the UK in early 1945. This scheme based on that of the HQ, 65th Fighter Wing, 8th US Air Force.

UncleTgt
November 13th, 2014, 00:33
Reading about the Soviet deployment of MiG-15s & La-11s to Shanghai in 1950, led me to research about Taiwan's P-47s.
What if the XP-47H had been produced in small numbers at the end of WW2. Rather than risk "new" jet fighter technology ahead of the Korean War, perhaps the US would have allowed the ROCAF to use P-47Hs to try to combat the new Russian fighters...

peperez
November 13th, 2014, 19:13
I clocked 490 MPH! It's really a bad guy.

Cheers

Pepe

UncleTgt
November 17th, 2014, 01:11
some more fictional repaint WIP...

Israeli 101 squadron camoed, & the racer redone as a hotrod from 56 Fighter Group 8 US Air Force

UncleTgt
November 20th, 2014, 00:21
I redid the 63FS & toned down the bright colours somewhat, & then did another 56FG skin, this time from the 61FS...

dvslats
November 20th, 2014, 01:57
Looking good UncleTgt. :friendly_wink:

Patiently awaiting...

peperez
November 20th, 2014, 15:56
...they are outstanding!

dmaloof
November 22nd, 2014, 10:10
Nice. like the israeli ones. keep thinking they are from wings over israel for sf2. Wouldnn't mind this for that sim too. Anyway, great work!:applause:

peperez
November 25th, 2014, 17:25
a Brazilian plane used in Italy!


157911579215793

peperez
November 25th, 2014, 17:26
I'm packing the planes now!

Cheers

Pepe

peperez
November 26th, 2014, 17:29
I think we need a DEPED substitute. Mine DEPED is corrupting the DP files.

Cheers

Pepe

Blood_Hawk23
November 26th, 2014, 17:44
I think we need a DEPED substitute. Mine DEPED is corrupting the DP files.

Cheers

Pepe


Try the newer version. I saw in the LA-11 that you are useing the 1.10. Try the 1.21 and see if you still have trouble.

peperez
November 28th, 2014, 19:33
I'm using the 1.20. I downgraded to 1.10 trying to stop the problem. Where can I find the 1.21 version?

Cheers

Pepe

Allen
November 28th, 2014, 19:59
Try http://simviation.com//cfs2utilities1.htm The DPED Version 1.2 at the end of the page. The zip say DPED121.zip

peperez
November 29th, 2014, 18:14
Try http://simviation.com//cfs2utilities1.htm The DPED Version 1.2 at the end of the page. The zip say DPED121.zip

No good...

Allen
November 29th, 2014, 18:17
No good how? I just checked. It is 1.21.

Also corrupting the DP? How so? Fail to save? Fail to open?

peperez
November 30th, 2014, 23:01
No good how? I just checked. It is 1.21.

Also corrupting the DP? How so? Fail to save? Fail to open?

The plane cause a CTD when shoot down.

Allen
December 1st, 2014, 00:02
I'm betting that is not really DPEDs falt. Open DPED and go to [Boxes] and check all of the parts that the boxes have attached to it. (The tabs at the bottom of the [Boxes] window.) Make sure a part is listed for each tab for all hit boxes.

Also attached the DP. I'll look at it.

peperez
December 1st, 2014, 00:24
I tryed to upload the XP-47H without success...

Sarg Willy
December 3rd, 2014, 16:44
Ran into a problem with As_aircraft , on crash after shoot down , going
CTD , the fix I found was rename , Cfs-1 crash model --c_model_ bf109e
for As_Ju87 and As_Bf110 , and regained the Fx- explosion on ground contact ,,:very_drunk:

peperez
December 5th, 2014, 03:48
http://www.sim-outhouse.com/soh_ftp/uploads/imageuploads/824414177601218809.jpg
A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - American

Description: The project has nine planes used by American, Brazilian, Chinese and Israeli Air Forces and one unarmed Reno racer. The two prototypes and the racer use textures from the original FS2004 Milton Shupe project. All other planes use textures made by Uncle TGT. I used a P-47D authentic panel to positioned the gauges.

To check it out, rate it or add comments, visit M_Shupe_P-47H_Thunderbolt.zip (http://www.sim-outhouse.com/sohforums/local_links.php?linkid=19201&catid=52)
The comments you make there will appear in the posts below.