DX10 and Steves Fixer

[Anthin]

A couple of questions about DX10 and Steves fixer. Yesterday
I installed the fixer and started playing around with it.
It sure runs smooth with sliders maxed. I still am getting shimmering
and running lines on runways etc, like DX9.
First question is I am not seeing any cockpit shadows any ideas?
Secondly the water is terrible!.If I change water color and animation
will that change my water in DX9?

Hope someone can advise.:applause:

[YoYo]

For VC - not all aircraft has a posibillity to simulate this. Try default Cessna. For the rest (if shadows isnt present in VC of the model), You can always use DX10Toolbox -> Aircraft -> Turn on VC cocpit shadows and take MDL inside file of model. Working good.
This file is in DX10Steve default Folder. For sure too - good weather with the Sun :).

[Paul J]

A couple of questions about DX10 and Steves fixer. Yesterday
I installed the fixer and started playing around with it.
It sure runs smooth with sliders maxed. I still am getting shimmering
and running lines on runways etc, like DX9.
First question is I am not seeing any cockpit shadows any ideas?
Secondly the water is terrible!.If I change water color and animation
will that change my water in DX9?

Hope someone can advise.:applause:

Yup - will be there in about ten minutes.17:27 EST here.

All the Best,

pj

[Paul J]

I still am getting shimmering
and running lines on runways etc, like DX9.
First question is I am not seeing any cockpit shadows any ideas?
Secondly the water is terrible!.If I change water color and animation
will that change my water in DX9?

Hope someone can advise.:applause:

We'll try, Anthin!

For your first issue - download and read the doc that's in my sig at the bottom... It will answer your shimmering issue, and give you same answers that will help. If you find a link missing - ask right back here again, as the doc has been revised, and i haven't had a whole lot of time to test all of them.

Second - go into the Fixer folder and open up ToolBox.exe, then take a look at these pics here, (https://www.dropbox.com/sh/jc22hm45hgv503a/1-OBNPMqob) showing the screens you should see as you get it enabled. First is in FSX - you need the "aircraft casts shadows on itself", then the three or four spots in the DX10 Controller, and then into the ToolBox itself, where you will browse to the aircraft you wish to change (yeah - each one individually). Find the interior.mdl file in the "model" folder, click on it - and you're done.

Last is water. You will find that the stock FSX water is pretty good, but you are probably using REX or AS or FSWC (Lite). Some of these are DX10, and do work, but many are awful. My personal is ActiveSky Evolution "04 - Frequency" waves, with the Inland Brown and Blue darkened some. I use REX clouds, and stock for everything else - actua;lly whatever Orbx creates for their airfields. My suggestion is to return the water to default first, and see what it's like - ok!

If you still need some more help - no problem - just ask away, :)

All the Best,

pj

[ncooper]

Hello Paul,

I am very pleased to see you are firing on all cylinders.
I have also withdrawn from the other place
and it's good to see you here.

All the best,
Nick.

[Roger]

Hello Paul,

I am very pleased to see you are firing on all cylinders.
I have also withdrawn from the other place
and it's good to see you here.

All the best,
Nick.

Well said Nick:applause:

[Paul J]

Hello Paul,

I am very pleased to see you are firing on all cylinders.
I have also withdrawn from the other place
and it's good to see you here.

All the best,
Nick.

I missed you, man!!!! I wondered where you had disappeared to. You are one of the "brains" in the DX10 world, and I'm thoroughly glad to meet up with you again! There's also a Nick Cooper over at the Orbx site, too. Is that you?

Well, I suppose the world has to change from time to time, and Roger has always been a very positive person in my wanderings, and I've liked the tone of SOH for a while.

Later:

All the Best,

pj

[odourboy]

Let me just add that most, but not all models allow for VC shadows. I've found that some older models that that were ported from FS9 do not have a separate 'interior VC' mdl file, and they generally don't work. Also, models by certain developers, a couple of IRIS models I tried for example, seem to disable the ability to turn on VC shadowing in their interior mdl. It's no problem to try, the fixer toolbox will simply say it was unable to turn on VC shadows.

[Roger]

Please note this thread has been copied to the new Dx-10 forum. please reply there.