View Full Version : Distance gauge
robert41
February 24th, 2014, 17:27
Iam looking for a distance gauge. Something simple that can tell me nm's flown. Something that I can reset to zero at any time during a flight. I have searched and could not find one.
Any help is appreciated.
rcbarend
February 26th, 2014, 13:01
Iam looking for a distance gauge. Something simple that can tell me nm's flown. Something that I can reset to zero at any time during a flight. I have searched and could not find one.
Any help is appreciated.
I made such a gauge years ago, but I don't think I uploaded it. (I use it for testing in carrrier operations and spaceflight).
Besides selectable units (ft, nmiles, meters, km's), you can reset the zero-point at any time.
It displays both "straight" distance (the distance between current position and ref. point) and "travelled" distance (which is what you want).
However, it needs a brush-up.
- Straight distance is only accurate within 100 nmiles or so, because it uses simplified formules (not the great-circle formules) now.
- It only measures in the horizontal plane (so doesn't take altitude difference into account). I'll implement that too, and make that user-selectable.
So I just need to re-code the original gauge a bit; all needed code is already implemented in my space-flight package, but not as stand-alone, simple gauge.
Probably have it ready in a week or so, after which I'll upload it here. (freeware of course) ...
Rob
PutPut
February 26th, 2014, 14:38
In addition to robert41, I also have a good use for this in an upcoming project. It will sit nicely in the flight engineer's panel.
Best, Paul
Bill Kestell
February 26th, 2014, 15:21
It would also be most useful for Hump flying ... especially between ndb signals.
Daveroo
February 26th, 2014, 18:32
that is very cool...ill use that as well..thank you very much.
robert41
February 26th, 2014, 18:58
I made such a gauge years ago, but I don't think I uploaded it. (I use it for testing in carrrier operations and spaceflight).
Besides selectable units (ft, nmiles, meters, km's), you can reset the zero-point at any time.
It displays both "straight" distance (the distance between current position and ref. point) and "travelled" distance (which is what you want).
However, it needs a brush-up.
- Straight distance is only accurate within 100 nmiles or so, because it uses simplified formules (not the great-circle formules) now.
- It only measures in the horizontal plane (so doesn't take altitude difference into account). I'll implement that too, and make that user-selectable.
So I just need to re-code the original gauge a bit; all needed code is already implemented in my space-flight package, but not as stand-alone, simple gauge.
Probably have it ready in a week or so, after which I'll upload it here. (freeware of course) ...
Rob
A huge thanks Rob. Looking forward to this.
srgalahad
February 27th, 2014, 06:56
... or one could use the same equipment that is required to be installed in all certified aircraft - a functioning clock.
It can be used to measure elapsed time, interval time (one ndb to the next), stages of an approach, time to/of climb/descent, and can be used as a reminder when dinner is ready.
Daveroo
February 27th, 2014, 07:05
... or one could use the same equipment that is required to be installed in all certified aircraft - a functioning clock.
It can be used to measure elapsed time, interval time (one ndb to the next), stages of an approach, time to/of climb/descent, and can be used as a reminder when dinner is ready.
oh allways with the obvious...you think were all as schmart as you?.......sheeesh.....:costumed-smiley-034
rcbarend
February 27th, 2014, 16:19
Hi,
Have a testversion ready now.
If anyone cares to test it before I upload, please drop me an Email, or PM with your Email address to mail it to.
For obvious reasons, I never upload anything untill at least one person has installed it / tried it properly :)
Best, Rob
rcbarend
March 1st, 2014, 06:31
I just uploaded the Distance Calculator gauge to SOH as file rcbdc-20.zip (in the FSX/Other section).
Enjoy ...
Cheers, Rob
Daveroo
March 1st, 2014, 07:06
very cool,thank you.
vBulletin® v4.2.1, Copyright ©2000-2024, Jelsoft Enterprises Ltd.