Ridge
June 6th, 2005, 23:04
By stiz
Hi
Anyone who has installed a new panel for the stock AC would have found out that the VC panel dissapears, well i've found a fix.
1,Before you install the new panel copy the panel.cfg found in the panel folder.
2,Install the new panel without deleting any thing in the panel folder.
3,Open the copy of panel.cfg and go to where it says "[VCockpit01]" and copy everything to do with the VC. Below is the section you would copy from the F4F4 Wildcat (stock):
[VCockpit01]
size_mm=256,256
pixel_size=256,256
texture=$F4F4_Wildcat
background_color=0,0,0
visible=0
gauge00=F4F4_Wildcat!Manifold-Pressure, 0, 0, 64, 64
gauge01=F4F4_Wildcat!Tachometer, 0, 64, 64, 64
gauge02=F4F4_Wildcat!Airspeed-Indicator, 0, 128, 64, 64
gauge03=F4F4_Wildcat!Fuel-Selector, 0, 192, 64, 64
gauge04=F4F4_Wildcat!Turn-Coordinator, 64, 0, 64, 64
gauge05=F4F4_Wildcat!Altimeter, 64, 64, 64, 64
gauge06=F4F4_Wildcat!Directional-Gyro, 64, 128, 64, 64
gauge07=F4F4_Wildcat!Ignition-Switch, 64, 192, 64, 64
gauge08=F4F4_Wildcat!Fuel-Tank-Content, 128, 0, 64, 64
gauge09=F4F4_Wildcat!Attitude-Indicator, 128, 64, 64, 64
gauge10=F4F4_Wildcat!Engine-Gauge, 128, 128, 64, 64
gauge11=F4F4_Wildcat!Landing-Gear-Position-Indicator, 128, 192, 64, 64
gauge12=F4F4_Wildcat!Cylinder-Temperature, 192, 0, 64, 64
gauge13=F4F4_Wildcat!Climb-Indicator, 192, 64, 64, 64
gauge14=F4F4_Wildcat!Clock, 192, 128, 64, 64
gauge15=F4F4_Wildcat!Magnetic-Compass, 192, 192, 64, 64
[VCockpit02]
size_mm=128,128
pixel_size=128,128
texture=$F4F4_Wildcat_2
background_color=0,0,0
visible=0
gauge00=F4F4_Wildcat!Starter, 0, 0, 64, 64
gauge01=F4F4_Wildcat!Flaps-Lever, 64, 0, 64, 64
gauge02=F4F4_Wildcat!Low-Fuel-Warning, 0, 64, 64, 64
gauge03=F4F4_Wildcat!Master-Switch, 64, 64, 64, 64
4,Open up the panel.cfg that came with the panel and paste the selection under the last window section.
Done. When you next fly that plane not only will you have its new panel but you have kept the VC.
Stiz
Not enough words :P
Hi
Anyone who has installed a new panel for the stock AC would have found out that the VC panel dissapears, well i've found a fix.
1,Before you install the new panel copy the panel.cfg found in the panel folder.
2,Install the new panel without deleting any thing in the panel folder.
3,Open the copy of panel.cfg and go to where it says "[VCockpit01]" and copy everything to do with the VC. Below is the section you would copy from the F4F4 Wildcat (stock):
[VCockpit01]
size_mm=256,256
pixel_size=256,256
texture=$F4F4_Wildcat
background_color=0,0,0
visible=0
gauge00=F4F4_Wildcat!Manifold-Pressure, 0, 0, 64, 64
gauge01=F4F4_Wildcat!Tachometer, 0, 64, 64, 64
gauge02=F4F4_Wildcat!Airspeed-Indicator, 0, 128, 64, 64
gauge03=F4F4_Wildcat!Fuel-Selector, 0, 192, 64, 64
gauge04=F4F4_Wildcat!Turn-Coordinator, 64, 0, 64, 64
gauge05=F4F4_Wildcat!Altimeter, 64, 64, 64, 64
gauge06=F4F4_Wildcat!Directional-Gyro, 64, 128, 64, 64
gauge07=F4F4_Wildcat!Ignition-Switch, 64, 192, 64, 64
gauge08=F4F4_Wildcat!Fuel-Tank-Content, 128, 0, 64, 64
gauge09=F4F4_Wildcat!Attitude-Indicator, 128, 64, 64, 64
gauge10=F4F4_Wildcat!Engine-Gauge, 128, 128, 64, 64
gauge11=F4F4_Wildcat!Landing-Gear-Position-Indicator, 128, 192, 64, 64
gauge12=F4F4_Wildcat!Cylinder-Temperature, 192, 0, 64, 64
gauge13=F4F4_Wildcat!Climb-Indicator, 192, 64, 64, 64
gauge14=F4F4_Wildcat!Clock, 192, 128, 64, 64
gauge15=F4F4_Wildcat!Magnetic-Compass, 192, 192, 64, 64
[VCockpit02]
size_mm=128,128
pixel_size=128,128
texture=$F4F4_Wildcat_2
background_color=0,0,0
visible=0
gauge00=F4F4_Wildcat!Starter, 0, 0, 64, 64
gauge01=F4F4_Wildcat!Flaps-Lever, 64, 0, 64, 64
gauge02=F4F4_Wildcat!Low-Fuel-Warning, 0, 64, 64, 64
gauge03=F4F4_Wildcat!Master-Switch, 64, 64, 64, 64
4,Open up the panel.cfg that came with the panel and paste the selection under the last window section.
Done. When you next fly that plane not only will you have its new panel but you have kept the VC.
Stiz
Not enough words :P