krazycolin
August 31st, 2012, 18:02
Hi all, We have now uploaded and sent out the latest patches for the Baron B-55/E-55. There is such a long list... I will just post it and you can go over it... (not sure when it will go live on other sites but our own is up now) thanks.
This v5.120830 installer has all the cumulative tweaks and fixes since the original release.
NEW: Fully synchronized GPS units! MilViz_B55_v5.120830.zip https://www.onlinefilefolder.com/1sYvsLkXuiqY5z
B55 CHANGE LOG ================== 08/17/2012 ==================
1. Edited GNS XML scripts to allow for full synchronization between 2d and 3d instances of the GPS units.
2. Modified XML script of right small knob of GNS430 for proper mouse click/wheel response.
3. Darkened the color of the 3d avionics knobs.
4. Edited panel.cfg files to allow proper GNS synchronization.
================== 08/17/2012 ==================
1. Fixed gap in top left main panel/glareshield
2. Intruded firewall behind pedals to stop interpenetration
3. Replaced and positioned the NAV/GPS ARM/ACTV text
4. Updated main panel texture to fix incorrect "GRS" label; should have been "GPS"
================== 08/14/2012 ==================
1. Fixed Landing Light switches (synchronization)
2. Calibrated Turn Coordinator
3. Added mouse wheel control to WX-10A
4. Animated toe brakes
================== 07/09/2012 ==================
1. Fixed ADF needle to point towards NDB reliably
2. Edited the GNS430 script to display the missing COM/NAV background rectangles.
3. Edited one of the texture files to paint out the lower registration placquard.
4. Added "Carb Heat" to the initialization routine for the B55 version.
================== 07/02/2012 ==================
1. Added 3d "housings" for all instruments to prevent possibility of "scenery leaks" around edges.
2. Found and fixed the problem with non-lighted HSI "dots" and "sky pointer" on attitude indicator.
3. Fixed problem with KAP140 "cutting" the GNS430 left knob, and glass "cutting" GNS530 right knob.
4. Checked for abnormal movement of left main tire. No problem found.
5 Edited gearup/geardown .wav files to fit 3.1 second extend/retract animation.
6. Added missing B55_fresnel_red.dds file (that's why the exterior glass had no reflections!)
================== 06/30/2012 ==================
1. Fixed landing gear extend/retract animation and synched to gear sound files.
2. Fixed exterior glass so it won't disappear when the cockpit lights are on.
3. Lowered intensity of 3d landing lights
4. Fixed elevator trim tab
5. Changed landing light switch operation to left click on/off toggle
6. Trimmed a LOT of "fat" from the interior model to reduce sim load (stuff that can't be seen from inside).
7. Corrected operation of rudder trim: left trim - nose and needle go left, trimtab goes right and vice-versa
8. Lighted the compass card for night operations
================== 06/28/2012 ==================
1. Calibrated ADI Bank and Roll with parallax correction
2. Calibrated both OAT gauges, removed small pointers (unnecessary)
3. Changed instrument lighting knob to use left/right/mousewheel to control, added dynamic tooltip
4. Added dynamic tooltip to Panel Flood knob
5. Added dynamic tooltip to Post Light knob
6. Improved tail beacon light (transparent glass, bright flash)
7. Exterior glass fixed (was invisible at night), set z-bias to eliminate GPS "bleed-through"
8. Fixed nosegear wheel chocks
9. Fixed exterior hinges for vent window
10. Fixed prop texture to make rear of blades flat black.updated diffuse, specular and bump maps
11. VSI Needle: Changed VSI needle to use Linear Rotation and calibrated
12. RMI Needles: Changed both needles to Linear Rotation, re-calibrated. Double needle is VOR/Localizer. Defaults to Nav2 Freq. Fixed switch for RMI Nav Source under the old Century autopilot. Reset compass card and recalibrated
13. Added additional CDI "dots" to HSI.Recalibrated CDI needle. Adjusted length of needle gap to match CDI needle. Reset compass card and recalibrated
14. Recalibrated airspeed needle after reseting Linear rotation controller
15. Fixed tooltip on altimeter's kohlsman knob for both inHg and MB. Recalibrated kohlsman index after resetting Linear rotation controller.
16. Fixed (lightened) knob textures on GPS's
17. Configured Installer to create two Airplane folders: B55 and E55 such that textures and aircraft sounds are shared between the two folders.
This v5.120830 installer has all the cumulative tweaks and fixes since the original release.
NEW: Fully synchronized GPS units! MilViz_B55_v5.120830.zip https://www.onlinefilefolder.com/1sYvsLkXuiqY5z
B55 CHANGE LOG ================== 08/17/2012 ==================
1. Edited GNS XML scripts to allow for full synchronization between 2d and 3d instances of the GPS units.
2. Modified XML script of right small knob of GNS430 for proper mouse click/wheel response.
3. Darkened the color of the 3d avionics knobs.
4. Edited panel.cfg files to allow proper GNS synchronization.
================== 08/17/2012 ==================
1. Fixed gap in top left main panel/glareshield
2. Intruded firewall behind pedals to stop interpenetration
3. Replaced and positioned the NAV/GPS ARM/ACTV text
4. Updated main panel texture to fix incorrect "GRS" label; should have been "GPS"
================== 08/14/2012 ==================
1. Fixed Landing Light switches (synchronization)
2. Calibrated Turn Coordinator
3. Added mouse wheel control to WX-10A
4. Animated toe brakes
================== 07/09/2012 ==================
1. Fixed ADF needle to point towards NDB reliably
2. Edited the GNS430 script to display the missing COM/NAV background rectangles.
3. Edited one of the texture files to paint out the lower registration placquard.
4. Added "Carb Heat" to the initialization routine for the B55 version.
================== 07/02/2012 ==================
1. Added 3d "housings" for all instruments to prevent possibility of "scenery leaks" around edges.
2. Found and fixed the problem with non-lighted HSI "dots" and "sky pointer" on attitude indicator.
3. Fixed problem with KAP140 "cutting" the GNS430 left knob, and glass "cutting" GNS530 right knob.
4. Checked for abnormal movement of left main tire. No problem found.
5 Edited gearup/geardown .wav files to fit 3.1 second extend/retract animation.
6. Added missing B55_fresnel_red.dds file (that's why the exterior glass had no reflections!)
================== 06/30/2012 ==================
1. Fixed landing gear extend/retract animation and synched to gear sound files.
2. Fixed exterior glass so it won't disappear when the cockpit lights are on.
3. Lowered intensity of 3d landing lights
4. Fixed elevator trim tab
5. Changed landing light switch operation to left click on/off toggle
6. Trimmed a LOT of "fat" from the interior model to reduce sim load (stuff that can't be seen from inside).
7. Corrected operation of rudder trim: left trim - nose and needle go left, trimtab goes right and vice-versa
8. Lighted the compass card for night operations
================== 06/28/2012 ==================
1. Calibrated ADI Bank and Roll with parallax correction
2. Calibrated both OAT gauges, removed small pointers (unnecessary)
3. Changed instrument lighting knob to use left/right/mousewheel to control, added dynamic tooltip
4. Added dynamic tooltip to Panel Flood knob
5. Added dynamic tooltip to Post Light knob
6. Improved tail beacon light (transparent glass, bright flash)
7. Exterior glass fixed (was invisible at night), set z-bias to eliminate GPS "bleed-through"
8. Fixed nosegear wheel chocks
9. Fixed exterior hinges for vent window
10. Fixed prop texture to make rear of blades flat black.updated diffuse, specular and bump maps
11. VSI Needle: Changed VSI needle to use Linear Rotation and calibrated
12. RMI Needles: Changed both needles to Linear Rotation, re-calibrated. Double needle is VOR/Localizer. Defaults to Nav2 Freq. Fixed switch for RMI Nav Source under the old Century autopilot. Reset compass card and recalibrated
13. Added additional CDI "dots" to HSI.Recalibrated CDI needle. Adjusted length of needle gap to match CDI needle. Reset compass card and recalibrated
14. Recalibrated airspeed needle after reseting Linear rotation controller
15. Fixed tooltip on altimeter's kohlsman knob for both inHg and MB. Recalibrated kohlsman index after resetting Linear rotation controller.
16. Fixed (lightened) knob textures on GPS's
17. Configured Installer to create two Airplane folders: B55 and E55 such that textures and aircraft sounds are shared between the two folders.