View Full Version : [FSX] Jodel DR-1050
David W.
December 4th, 2011, 11:02
[FSX] Jodel - DR-1050
This is the project that will allow me to take my part in the long winter evenings ... ;)
http://tagazous.free.fr/photos/highdef/21/21092.jpg
l8USUIPPCJY
Specifications of DR 1050:
Overall dimensions
- Wing span: 8.72 m
- Lenght: 6.48 m
- Height: 1.77 m
Weights and loadings
- Empty weight (with oil): 415 kg
- Max Take off weight: 750 kg
- Usefull load: 355 kg
- Fuel 80/87 Octane
- Fuel capacity (front): 55 l
- Fuel capacity (rear): 55 l
Engine
- Motor Continental 0-200A: 100 hp
Performance:
- VNE: 260 km/h
- VNO: 210 km/h
- VP: 170 km/h
- VFE: 150 km/h
/!\Only for FSX
WIP: Preview of GMAX:
http://img535.imageshack.us/img535/9671/previewexteriorjodeldr1.jpg
http://img827.imageshack.us/img827/9671/previewexteriorjodeldr1.jpg
http://img210.imageshack.us/img210/9671/previewexteriorjodeldr1.jpg
Little to see if the FSX Gamepack is ok:
http://img408.imageshack.us/img408/9671/previewexteriorjodeldr1.jpg
http://img593.imageshack.us/img593/9671/previewexteriorjodeldr1.jpg
The last update, and the front fuselage of motor it's not finish:
http://img844.imageshack.us/img844/9671/previewexteriorjodeldr1.jpg
I hope you have pleasure to read this topic and sorry for my bad english ;)
Excuse if the topic is not in the good section.
David W.
December 4th, 2011, 23:59
Little update:
Before:
http://img685.imageshack.us/img685/9671/previewexteriorjodeldr1.jpg
After:
http://img198.imageshack.us/img198/9671/previewexteriorjodeldr1.jpg
I restart the fuselage, I use more polygons and I think it's look good ;).
Next step finish the engine cowlings.
Cag40Navy
December 5th, 2011, 11:09
Can wait to fly this bird when shes done.
full
December 5th, 2011, 12:32
Great work !! keep us posted.
Milton Shupe
December 5th, 2011, 18:33
David, your project is progressing very well. It is a great way to get through the winter months.
Keep us posted here and if you have any questions, maybe we can help.
Great aircraft subject too. :)
David W.
December 8th, 2011, 01:20
Thank you for all your comments ;)
Update:
http://img405.imageshack.us/img405/9671/previewexteriorjodeldr1.jpg
http://img40.imageshack.us/img40/9671/previewexteriorjodeldr1.jpg
David W.
December 9th, 2011, 01:20
Little update:
http://img841.imageshack.us/img841/9671/previewexteriorjodeldr1.jpg
David W.
December 12th, 2011, 09:54
The project is temporarily suspended, due to overload at work with the season end approaching. I'm very busy :( Otherwise after reading about the Ménestrel HN-433 by Lagaffe (French Topic) (http://www.pilote-virtuel.com/viewtopic.php?id=16127), I could identify each step for a smooth running of the project in its continuity. The other day I was doing an export of the tail in order to validate the installation of the SDK. But he could not be complete without the tag animation and validation in FSX.
Below a video: Jodel DR-1050 / Test animation N°1 (ftp://pilotevir:echange@ftp2.pilote-virtuel.com/David_W/Test_elevator_rudder.mp4)
Milton Shupe
December 12th, 2011, 19:12
The project is temporarily suspended, due to overload at work with the season end approaching. I'm very busy :( Otherwise after reading about the Ménestrel HN-433 by Lagaffe (French Topic) (http://www.pilote-virtuel.com/viewtopic.php?id=16127), I could identify each step for a smooth running of the project in its continuity. The other day I was doing an export of the tail in order to validate the installation of the SDK. But he could not be complete without the tag animation and validation in FSX.
Below a video: Jodel DR-1050 / Test animation N°1 (ftp://pilotevir:echange@ftp2.pilote-virtuel.com/David_W/Test_elevator_rudder.mp4)
Yes, that works. And now, you are making the big progress. Have fun!
David W.
December 13th, 2011, 12:30
Finally, I still found time to work on the 3D gauges.
A little bug, any idea why the indicator is inverse on the animation ? Not the good axis on Gmax ?
A French draft on the subject: Draft to create 3D gauge on FSX (French) (http://www.pilote-virtuel.com/viewtopic.php?pid=382513#p382513)
For you, below just the picture about developement and test on FSX, because my english is not good to explain step by step the procedure.
http://img9.imageshack.us/img9/3783/tuto1d.jpg
http://img210.imageshack.us/img210/4698/tuto2w.jpg
http://img59.imageshack.us/img59/4896/tuto3iv.jpg
http://img37.imageshack.us/img37/8189/tuto4su.jpg
http://img832.imageshack.us/img832/616/jaugefuel0.jpg
http://img189.imageshack.us/img189/1027/jaugefuel50.jpg
http://img13.imageshack.us/img13/8799/jaugefuel75.jpg
http://img859.imageshack.us/img859/5496/jaugefuel100.jpg
Yes, that works. And now, you are making the big progress. Have fun!
Thank you for your encouragement. And it's a great pleasure to develop on FSX.
A big thank for you, I read many greats tutorial write by you before to start the Jodel. (The Cessna C162 for example)
David W.
December 13th, 2011, 12:32
I add this line on "modeldef.xml" for the fuel indicator
sorry no xml's posted, messes up the forums, ... ickie
Milton Shupe
December 13th, 2011, 16:43
David,
The only thing that comes to my mind is that you may have animated it using the View Coordinate.
Animations require that you use teh Local Coordinate system, at least that is true in gmax/makemdl for FS9.
Check your animation again and be sure to select the Local Coordinate system before animating.
David W.
December 13th, 2011, 23:30
David,
The only thing that comes to my mind is that you may have animated it using the View Coordinate.
Animations require that you use teh Local Coordinate system, at least that is true in gmax/makemdl for FS9.
Check your animation again and be sure to select the Local Coordinate system before animating.
I just add 25% 50% 75% keyframes and it's work ;)
I use the local cordinate system when a create the animation. The screenshot was take after the creation.
http://img545.imageshack.us/img545/369/jaugefuel60.jpg
Thank you for your help and sorry for the xml code post.
David W.
December 20th, 2011, 13:24
And ittle news of 3D gauges for the panel:
http://img4.imageshack.us/img4/9671/previewexteriorjodeldr1.jpg
http://img522.imageshack.us/img522/6517/previewgaugesjodeldr105.jpg
The texture mapping is not finish yet.
David W.
December 21st, 2011, 12:11
I redefine the smoothings groups not automatic way and try 'HDR' texture on FSX and it's work ;)
http://img805.imageshack.us/img805/6517/previewgaugesjodeldr105.jpg
http://img696.imageshack.us/img696/6517/previewgaugesjodeldr105.jpg
David W.
December 24th, 2011, 06:27
I take this last preview before the holiday season to wish you all a Merry Christmas and a happy new year ;)
http://img831.imageshack.us/img831/6517/previewgaugesjodeldr105.jpg
David W.
January 15th, 2012, 03:17
Mounting the engine cowlings on the fuselage.
http://img825.imageshack.us/img825/9671/previewexteriorjodeldr1.jpg
Good Sunday;)
David W.
January 17th, 2012, 11:01
Now you can see some pictures of the new fuselage modeling, using the "Loft" fonction on Gmax.
Click on pictures to enlarge !
"Performance indicator render mode" on MCX. Next step, the wing !
http://img268.imageshack.us/img268/670/v0021k.th.jpg (http://img268.imageshack.us/img268/670/v0021k.jpg)
Somes statistics with the DrawCallMonitor.
http://img848.imageshack.us/img848/8905/v0022.th.jpg (http://img848.imageshack.us/img848/8905/v0022.jpg)
Vertex, and normal render ;)
http://img830.imageshack.us/img830/4402/v0023.th.jpg (http://img830.imageshack.us/img830/4402/v0023.jpg)
In Gmax:
http://img703.imageshack.us/img703/3453/v0024.th.jpg (http://img703.imageshack.us/img703/3453/v0024.jpg)
In FSX:
http://img843.imageshack.us/img843/9021/v0026.th.jpg (http://img843.imageshack.us/img843/9021/v0026.jpg)
Bonus, in FS9. Careful, just a little test and share with you. The aircraft is only for FSX
http://img17.imageshack.us/img17/3102/v0027.th.jpg (http://img17.imageshack.us/img17/3102/v0027.jpg)
Lots of thanks Arno, your tools is very great for me. ;)
Good week for all. See you soon for other update.
Roger
January 17th, 2012, 11:20
Great progress:applause: Thanks for keeping us up-to-date:ernae:
David W.
January 22nd, 2012, 01:43
Great progress:applause: Thanks for keeping us up-to-date:ernae:
Thank you Roger, it's a pleasure to keep up this topic ;)
---------
When I wake up early this morning, I wanted to move, and delete many vertex on the fuselage of the Jodel. Review the couples of rear of the fuselage. Forms were not equated with the real model. Then start for the part inside the fuselage.
http://img638.imageshack.us/img638/9671/previewexteriorjodeldr1.jpg
http://img705.imageshack.us/img705/9671/previewexteriorjodeldr1.jpg
Then after reviewing the fuselage, engine cowling modification to reduce the opening. Also my mesh is rather homogeneous throughout;)
http://img35.imageshack.us/img35/9671/previewexteriorjodeldr1.jpg
David W.
January 23rd, 2012, 09:30
I try to create inner fuselage and the prototype of the canopy:
http://img266.imageshack.us/img266/9671/previewexteriorjodeldr1.jpg
http://img859.imageshack.us/img859/9671/previewexteriorjodeldr1.jpg
I hope it's a pleasure for your eyes ;)
Roger
January 23rd, 2012, 09:56
Very pleasing to the eyes:engel016:
Milton Shupe
January 24th, 2012, 04:54
Your modeling skills and artistic eye are evident in your progress pictures. Thank you for sharing with us. Great work! :applause:
David W.
February 3rd, 2012, 23:18
Sorry for this long silence, I'm very busy on my work !!
Thank for your comments, it's a good motor for progressing on the developpement ;)
And it's a pleasure to share my progress with you, although my English is not the best.
http://img38.imageshack.us/img38/9671/previewexteriorjodeldr1.jpg
http://www.youtube.com/watch?v=w7WccJSMcHY
http://www.youtube.com/watch?v=sC74XEPLs4E
Roger
February 4th, 2012, 13:46
Ha ha, David, your english is a thousand times better than my french...we can understand you perfectly!
David W.
February 14th, 2012, 10:23
Thank you Roger ;)
Some news about the 3D gauges after a little silence:
http://img11.hostingpics.net/pics/430335931.jpg
http://img11.hostingpics.net/thumbs/mini_485561862.jpg (http://img11.hostingpics.net/pics/485561862.jpg)
Click for full size
http://www.youtube.com/watch?v=d-F2nodZ-mQ
hairyspin
February 14th, 2012, 10:37
Good work, keep going! :applause:
David W.
February 22nd, 2012, 13:22
Good work, keep going! :applause:
Thank hairyspin ;)
Gauge update:
http://img15.hostingpics.net/pics/127371panel.jpg
David W.
February 23rd, 2012, 11:23
New update:
Uptade texture panel (http://img11.hostingpics.net/pics/3414791big.jpg)
David W.
March 4th, 2012, 11:06
Here is the GPS for the Jodel who happens to be finished at 90%
Remains the LEDs to add and improve the brightness with the ON / OFF
Youtube video:
http://www.youtube.com/watch?v=Q3OSViBQqgk
David W.
March 13th, 2012, 13:58
Last news !!
http://img15.hostingpics.net/pics/211242small.jpg
Biggest picture:
http://img15.hostingpics.net/pics/588292big.jpg
David W.
March 31st, 2012, 01:00
Little update:
http://img15.hostingpics.net/pics/288650661.jpg
http://img15.hostingpics.net/pics/364141202.jpg
David W.
April 1st, 2012, 09:40
New video:
http://www.youtube.com/watch?v=FsigP1YJpQM&feature=player_embedded
http://www.youtube.com/watch?v=haQux4K8NoY&feature=player_embedded
David W.
May 7th, 2012, 13:11
Look here:
gSWmRRQ4n9s
David, these youtube links are not showing or working.
David W.
May 8th, 2012, 13:31
hBEbQhZulok
David W.
May 10th, 2012, 03:13
pwKMAKtjzNA
David W.
May 14th, 2012, 13:19
Sorry for this mistake with the youtube post.
You can delette posts. :)
And now the futur avionics for IFR Panel
http://img11.hostingpics.net/pics/271581251.jpg
http://img11.hostingpics.net/pics/710778652.jpg
David W.
May 18th, 2012, 05:46
New update:
http://www.youtube.com/watch?feature=player_embedded&v=wjE8jqI7yEQ
And somebody knows a runway with ILS and Markers to test my OMI light on my Garmin GMA 347 panel ?
Thank you !
David W.
May 18th, 2012, 12:19
It's work perfect on KRDU runway 23R, ILS frequency 111.7 :)
David W.
May 18th, 2012, 12:50
http://www.youtube.com/watch?v=THyBmkT--2o
Milton Shupe
May 18th, 2012, 19:00
That is quite an achievement David. Beautiful work! :applause:
David W.
May 19th, 2012, 05:14
Thank you Milton, I am touched by your comment :)
Next step, the GNS 430
65727
David W.
June 10th, 2012, 12:53
Model & texture of Continental O-200.
Click for full size
http://img15.hostingpics.net/pics/582911small.jpg (http://img15.hostingpics.net/pics/582788big.jpg)
http://youtu.be/_SeZBQQAFXY?hd=1
First study to integrate vibrations in the engine.
http://youtu.be/gg9ojp0N1wU?hd=1
dandog
September 7th, 2012, 21:46
Bump time. What became of the Jodel, if I may ask?
Daniel
David W.
September 9th, 2012, 00:52
Bump time. What became of the Jodel, if I may ask?
Daniel
Hello dandog,
Sorry, but I was very busy and forget to update this topic !
Now let's go:
Some pictures:
http://img15.hostingpics.net/pics/298080371.jpg
http://img15.hostingpics.net/pics/844267732.jpg
http://img15.hostingpics.net/pics/762001163.jpg
http://img15.hostingpics.net/pics/497976421.jpg
http://img15.hostingpics.net/pics/181990402.jpg
http://img15.hostingpics.net/pics/756042864.jpg
http://img15.hostingpics.net/pics/891137933.jpg
Click to enlarge
http://img15.hostingpics.net/pics/375191385.jpg (http://img15.hostingpics.net/pics/275442865.jpg)
And videos:
http://www.youtube.com/watch?v=lBPGxpW4d-E
http://www.youtube.com/watch?v=UEifZ6tGnF0
http://www.youtube.com/watch?v=wNJv_mEhVCM
http://www.youtube.com/watch?v=j38eQZ5Hky0
And a little render test with Blender 2.63a, just for fun !!
Click to enlarge
http://img15.hostingpics.net/pics/185910rendermini.jpg (http://img15.hostingpics.net/pics/894128render.jpg)
And the version V0.0.9 should be out soon !
N2056
September 9th, 2012, 08:44
Thanks for the update. It's really looking good! :applause:
dandog
September 9th, 2012, 08:58
AWESOME!!!:jump:
David W.
September 14th, 2012, 13:40
http://danslesairs.fr/data/screenshots/monthly_09_2012/5ed66de67d31e6f8720b6714fd2b9dd0-big_v009.jpg
Version of the Jodel V0.0.9 is available
Jodel DR-1050 V0.0.9 (http://www.danslesairs.fr/portail/index.php?/files/file/15-jodel-dr-1050/)
Roger
September 14th, 2012, 15:05
Hi David, it seems we have to join the site to download, but I can't see how to join?
Regards,
Roger.
Firekitten
September 14th, 2012, 15:39
Click Créer un compte Roger...
Nom d'utilisateur is username
Adresse de courriel is email
Mot de passe is password...
rest is pretty easy :)
dandog
September 14th, 2012, 19:35
Then, You will receive an email with with an ID and validation number which you must input after clicking on the link as directed. I suggest you use a translation tool on the internet. Just google " translate" and copy the whole email you for translation. Input the ID and Validation number. THEN you can download. The French valiantly hold on to their right to speak French.:salute:
dandog
September 14th, 2012, 20:10
Le modèle extérieur est correct, mais le modèle intérieur est absente. Unless My download was not complete. Viva la Jodel! Please?!.
David W.
September 15th, 2012, 01:41
Thank you Firekitten & dandog to help Roger for registration and download the product ;)
Because it is still a "prototype" and I want to have a return through the forum (hhtp://danslesairs.fr/portal), I am "forced" to use this system. And the second is the language, because now I prefer use "French". Sorry for the other users who prefer use English. :(
I know it's annoying to have to Register Get on the forum to download the "Jodel".
Jodel happens to be still in a prototype phase. It is a little advanced stage of development.
The external model begins to take shape, there is still alot of parts texturing and still many bugs on the UVW Map paint.
For interior model, I'd say it's worse. Some instruments on the panel and that's it!
Interior model:
http://img11.hostingpics.net/pics/322690541.jpg
I know it's pretty frustrating, but on one side I am happy to share the progress of my work.
David W.
January 14th, 2013, 11:59
Some news about the Jodel (it's not a dead project):
http://img15.hostingpics.net/pics/848603321.jpg
http://img15.hostingpics.net/pics/893020243.jpg
http://img15.hostingpics.net/pics/812044702.jpg
http://img11.hostingpics.net/pics/342903322.png
Version HD (http://img11.hostingpics.net/pics/392969982.png)
Videos:
http://www.youtube.com/watch?v=0R8vlHj0FIM
http://www.youtube.com/watch?v=nBG9AHA1-XI
http://www.youtube.com/watch?v=YjahdnskSU0
http://www.youtube.com/watch?v=AP7oFJgAW3Q
And Happy New Year !!!
OleBoy
January 14th, 2013, 12:28
Several times while browsing this part of the forums I have popped in here. I was one who thought this project had fizzled out, so your posting is a surprise.
It's nice to know you're still plugging along with it.
It looks real nice. :)
David W.
January 16th, 2013, 09:31
Thank you OleBoy
Milton Shupe
January 16th, 2013, 15:44
David,
This is definitely a work of art and a labour of love. It shows grace and beauty and reflects the skills of your hands. Thank you for sharing it with us. :applause:
David W.
February 9th, 2013, 00:32
Yes Milton Shupe, It's always a great pleasure to develop the Jodel. :)
I use Blender to bake normal map texture. I am trying to write a tutorial on the process.
My export method (French):
http://www.youtube.com/watch?v=cuHy20MgxhA
Some little news:
http://img11.hostingpics.net/pics/890858531.jpg
http://img11.hostingpics.net/pics/534940882.jpg
Click for original version
http://img11.hostingpics.net/pics/662323small.jpg (http://img11.hostingpics.net/pics/426877big.jpg)
Roger
February 9th, 2013, 03:17
The wow factor has stepped up a notch:ernae: really looking forward to the finished article.
David W.
February 13th, 2013, 12:25
The wow factor has stepped up a notch:ernae: really looking forward to the finished article.
;)
http://www.sim-outhouse.com/sohforums/showthread.php?75713-FSX-How-to-create-Nomal-Map-AO
David W.
October 18th, 2015, 04:04
The project is not dead ... :)
It's just that I must find time to work on it.
Overview of the progress of Jodel after ~2 years :
Click on image to enlarge
http://img15.hostingpics.net/pics/444293little.png (http://img15.hostingpics.net/pics/797188big.png)
Click on image to enlarge
http://img15.hostingpics.net/pics/491459little.png (http://img15.hostingpics.net/pics/120120big.png)
Click on image to enlarge
http://img15.hostingpics.net/pics/684192little.png (http://img15.hostingpics.net/pics/149467big.png)
David W.
October 18th, 2015, 04:04
Click on image to enlarge
http://img15.hostingpics.net/pics/283510little.png (http://img15.hostingpics.net/pics/765762big.png)
Click on image to enlarge
http://img15.hostingpics.net/pics/626183little.png (http://img15.hostingpics.net/pics/924420big.png)
Click on image to enlarge
http://img15.hostingpics.net/pics/995524little.png (http://img15.hostingpics.net/pics/959992big.png)
hairyspin
October 18th, 2015, 08:09
As another with too much real life work these days I sympathise. External textures look good!
Milton Shupe
October 19th, 2015, 08:05
Happy to see this is still an active project David. Thanks for persisting and sharing with us your progress. :jump:
David W.
October 26th, 2015, 09:05
Thznk you so muc for our comments Milton Shupe & hairyspin.
It's a pleasure to share my work with you :)
David W.
November 16th, 2015, 10:41
http://img11.hostingpics.net/pics/770643Capture.png (http://img11.hostingpics.net/pics/770643Capture.png)
I don't know if you know (repetition http://www.fsdeveloper.com/forum/styles/default/xenforo/clear.png), but you can download the developpement version on Github:
https://github.com/DavidWisser/DLA_Jodel_DR-1050_P3D
Be careful, is only a P3D V3 version yet.
David W.
December 7th, 2015, 06:38
Ambient occlusion done !!
http://img15.hostingpics.net/pics/486807120330Capture.png
Original size (http://img15.hostingpics.net/pics/120330Capture.png)
Milton Shupe
December 7th, 2015, 07:39
David, the AO is well worth the time invested; that looks great! :applause:
TuFun
December 13th, 2015, 18:32
Flew your model in P3Dv3 and is very nice indeed!
http://www.fsfiles.org/flightsimshotsv2/images/2015/12/14/d1.jpg
https://www.youtube.com/watch?v=5ahFww8P-2E
David W.
December 28th, 2015, 14:06
http://danslesairs.fr/Preview_Jodel.PNG
New step to approch the release version !!
I am proud and exited to announce you the beta version of Jodel DR-1050 is available now !!
Go here to donwload the V1.0-beta:
Jodel DR-1050 - V1.0-beta ('http://www.danslesairs.fr/portail/index.php?/files/file/15-jodel-dr-1050/')
Be careful, many little bug are not fixed yet, I'm working hard to fixe all in january :)
If you have problem, post on good section of my website Dans les Airs - Portail ('http://www.danslesairs.fr/portail/index.php?/forum/9-jodel-dr-1050/') or Tracker ('http://www.danslesairs.fr/portail/index.php?/tracker/')
I hope you have pleasure to fly with :)
And Happy New Year !!!
David W.
December 28th, 2015, 14:08
Flew your model in P3Dv3 and is very nice indeed!
...
Yeah TuFun, really cool video with the Jodel, and I'm so happy to see fly with :)
look for the new beta version is better, the interior as now textured :)
vBulletin® v4.2.1, Copyright ©2000-2024, Jelsoft Enterprises Ltd.