PDA

View Full Version : off topic mauser 98



Cirrus N210MS
March 15th, 2011, 15:52
few years ago i picked up my first mauser at a local big 5 for $80 dollars

this old rifle has history it has finger print in the wood stock from the soldier who carried it into battle with the turkish army they rebored the gun from 7x57mm to 8mm to match the germans in ww2 to fit the 8mm ammo they cut a slot on the magazine

this weapon works so good when i got the gun the ejector was busted and it still woked
like it was not broken

last year my friend ed found a mauser 98 on his farm broken in half i took this gun home and a week later i rebulit it for him new stock and thats all it needed

then a few days later we test fired his rifle from table and rope it worked! when i got it the action was jammed lol he was so happy! now all he talks about is how much he likes that rifle

----------below my mauser------------------------

http://i1140.photobucket.com/albums/n579/MikeMannschreck/my%20firearms%20collection%20images/DSC00160.jpg

http://i1140.photobucket.com/albums/n579/MikeMannschreck/my%20firearms%20collection%20images/DSC00158.jpg
http://i1140.photobucket.com/albums/n579/MikeMannschreck/my%20firearms%20collection%20images/DSC00157.jpg
http://i1140.photobucket.com/albums/n579/MikeMannschreck/my%20firearms%20collection%20images/DSC00156.jpg
http://i1140.photobucket.com/albums/n579/MikeMannschreck/my%20firearms%20collection%20images/DSC00155.jpg

http://i1140.photobucket.com/albums/n579/MikeMannschreck/my%20firearms%20collection%20images/DSC00152.jpg
http://i1140.photobucket.com/albums/n579/MikeMannschreck/my%20firearms%20collection%20images/DSC00151.jpg

http://i1140.photobucket.com/albums/n579/MikeMannschreck/my%20firearms%20collection%20images/DSC00149.jpg
http://i1140.photobucket.com/albums/n579/MikeMannschreck/my%20firearms%20collection%20images/DSC00148.jpg

peter12213
March 15th, 2011, 15:57
I'm a huge fan of the Mauser, the 98 Karabiner being my personal favourite, yours looks fantastic too!

Cirrus N210MS
March 15th, 2011, 16:19
thanks its my fav rifle of all time i really want a k98k

Warrant
March 15th, 2011, 17:08
That's one of the reasons why i just love the USA! You CAN get a rifle like that, and get it for $80,-!
In my country you have to be member of a gun-club for a year in order to apply for your first gun permit. The gun-dealers (e.g. the legal gun-stores) are quite sparse and the prices are quite high.
Gun control in our country is very strict, but not without a reason. We are with 16 million people in a state roughly the size of Maine. Freedom in/with guns simply would not work in our country, though the prices for gun's and ammo (not the magazine) could be lower, for those who have permits.
One of the absurd gun laws in our country is that we are not allowed to have folding/adjustable stock. A weapon with an adjustable stock (like the Colt M4) has to have the stock fixed.
You cannot have automatic weapons neither (which is fine by me since i'm only interrested in semi-automatic and better more, bolt-action rifles).
Still a few months to go before i can apply for my first permit; and you might guess what that will be.......: .303, Lee-Enfield No. 4 Mk I.

guzler
March 15th, 2011, 17:25
We used to fire the Lee Enfields when I was a wee air cadet, used to come home with a sore shoulder. That's a lovely gun, however guns are frowned upon here in th UK, it's not politically correct to say you like a gun !!!!

Cirrus N210MS
March 15th, 2011, 17:34
in usa i can have alot of fun with my ak-47 :salute:

deimos256
March 15th, 2011, 18:13
Oh boy another surplus rifle thread. I got a 1943 byf Mauser that was a Russian capture for about 300. The metal including the bore was immaculate but the stock had that nasty varnish that is common to surplus Mosins. Not long ago I stripped the gun and refinished the stock with tung oil. I also picked up a new front sight hood and the cleaning rod. I got a couple pics hanging around I'll try and get them posted.

Marvin Carter
March 15th, 2011, 19:31
This is my 1942 Turk Mauser, This gun is a Tack driver, out to 600 yards!!!
308 cal.
tuned
Shieland barrel
Bold optima trigger
Bell and Carlson stock
Harris bypod
Bussnel mil dot 6x24x40

33283

deimos256
March 16th, 2011, 03:30
It was cloudy when I took these but you get the general idea, the wood looks so nice in the sunlight now. Also has anyone installed a front sight hood on one of these? What a challenge!

http://i142.photobucket.com/albums/r101/deimos256/mau1.jpg
http://i142.photobucket.com/albums/r101/deimos256/mau2.jpg

Roger
March 16th, 2011, 13:10
There's a tortoise creeping up on your rifle...maybe trying to steal it:kilroy:

peter12213
March 16th, 2011, 13:29
That 98K is simply gorgeous! Clearly well loved and cared for!

Warrant
March 16th, 2011, 14:19
Excellent piece there! Wow! :salute:

nio
March 16th, 2011, 15:08
There's a tortoise creeping up on your rifle...maybe trying to steal it:kilroy:

Actually.Roger I had the tortoise down to race the bullet.:wavey:

best

nio

deimos256
March 16th, 2011, 15:29
Thank you thank you. Don't worry about the tortoise he's just going for a carrot across the deck! What ammo is everyone having good luck with? I find yugo surplus to give the best results and Romanian to just be all over the place.

huub vink
March 16th, 2011, 15:46
Gun are perhaps quite normal in the USA and some other countries, but in many countries guns are quite controversial. As this is an international forum I would like ask your understanding for this.

Personally I think guns have absolutely nothing to do with virtual and real aviation therefore I kindly as you, as a fellow member and not as SOH staff to post threads in another more suitable forum.

Thanks,
Huub

MHAircraft
March 17th, 2011, 10:10
Admin, please move this to the Other Hobbies section. Thanks!

I'm very glad that we resolved the issue with gun porn amicably. As promised, here are my Mausers:

Yugoslavian M24/47
Yugoslavian M48BO
Chinese Chiang Kai Shek Rifle
another Chinese Chiang Kai Shek Rifle

33356333553335333354http://www.sim-outhouse.com/sohforums/images/misc/pencil.png

MHAircraft
March 17th, 2011, 10:12
Czech Vz.24, pre-war with Lion Crest
Kar98k, Russian Capture

3335833357

huub vink
March 17th, 2011, 10:32
No problem, done.

Huub

Ivan
March 18th, 2011, 05:49
Hello Again Huub Vink,
I believe that guns sometimes DO have a relationship to virtual aviation. I build stuff only for Combat Flight Simulator. As such I am doing research on Aerial weaponry to complete some of my projects. The thing I am specifically looking for is the weight of a complete round of ammunition with link for all of the weapons my planes carry. Stock values for CFS1 are all for just the bullet (projectile). The 1% spreadsheet also lists just projectile weights.

I am glad this message is in the "Other Hobbies" section. It is the proper place.

Regarding clones of the Mauser 1898, It seems like most of the guns described here so far other than the Russian captured K98 are examples of the short actions. A long action gun should be able to function with a round the length of the .30-06. I probably am not using the correct technical term. I am not really a collector of Mauser 98s.

- Ivan.

MHAircraft
March 20th, 2011, 10:08
Modern bolt action rifle manufacturers often make long and short action variants to accommodate two general categories of casing length. However, this is a moot point to military rifles of the past, because they often standardize only one one caliber, or slight variations thereof.

Yugoslav Mausers have a slightly shorter action than standard Mausers. However, they both fire the 7.92x57mm round. The casing length of the .30-06 is 61mm. Perhaps the difference is too small to matter.

Ivan
March 20th, 2011, 16:26
I am not an expert on Mauser rifles though I do own some variations of them, so perhaps I should have explained my meaning better.

The Mauser 98 came in lots of variations. There were large ring and small ring (This would be the receiver ring between the barrel and the magazine opening. I forget the exact diameters. There is also different action lengths even for the same caliber: notably for the 7.92 mm x 57 or "8 mm Mauser". The Germans and I believe the Colombians as well used a long action that could easily be rechambered to accept a 7.62 mm x 63 or .30-06 as we call it on this side of the pond. As you pointed out, Yugoslavia and others (I believe Belgians as well) made a rifle with an action that was only about 1/4 inch shorter which was still capable of using the 7.92 x 57 but was not capable of accepting a .30-06 round. Without a ruler, it is very difficult to tell the difference. This is also the reason I never bought a Yugoslav Mauser even when they were very cheap. As one other gentleman pointed out, some actions were even shorter and needed the receiver rings slotted to accept even the 7.92 x 57.

Yes, I know there are magnum length actions, but this was not what I was trying to describe.

- Ivan.

Willy
April 1st, 2011, 18:11
Yugoslav Mausers have a slightly shorter action than standard Mausers. However, they both fire the 7.92x57mm round. The casing length of the .30-06 is 61mm. Perhaps the difference is too small to matter.

I've got a relative that had a sporterized Turkish Mauser in 8x57 rechambered to the wildcat 8mm-06 (30-06 necked up to 8mm) round. The extra case length apparently wasn't a problem, but then in a lot of things each rifle is a law unto itself.

OBIO
April 19th, 2011, 22:38
Back in the day, back when I owned firearms, there was a small gun shop out in the middle of nowhere that carried a lot of ex-military bolt action rifles and some ex-military semi-auto stuff. I picked up two ex-military rifles from that store.

First was a Mosin Nagant 1891 Russian Infantry Rifle. Mine was built in 1901. Got it for $65. It was filthy dirty, packed with cosmoline from one end to the other. Took it home, took it apart, found 5 dead bugs in the cavity between the bottom of the barrell and the wooden fore stock. Gave it a good cleaning, a good oiling, lightly scuffed the stock, heated it with a blow dryer and worked some linseed oil into the wood. That rifle was a blast to shoot....though an expensive one to shoot. The only ammo I could find were some Czech surplus stuff that had the mercury oxide primer, at 8 for 20 rounds, and some US made stuff for 9 for 10 rounds. I did not want to have to scrub the gun down every time I shot it...so I opted for the more expensive ammo and shot it less.

The second rifle I picked up was a 1916 Spanish Mauser that had been rechambered/rebored for .308. Got it for $50, maybe $55. It had been imported by a firm in Florida...Sun Valley Arms or something like that. Really good job on the reboring. That rifle was a tack driver. I bought Olin (a subsidiary of Winchester) 174 grain FMJ for 7 buck for 20 rounds. I could shoot that rifle all day long! Loved it.

Oh, also picked up a non-military M1 Carbine clone perhaps...looked just like the M1 Carbine but did not have the bayonet lug. Great little shooter. Set me back $60. Again, I bought the Olin ammo....$6 for 50 rounds. Great little rifle. My 9 year old nephew loved shooting it..well right up until a hot casing went down the front of his shirt. That kid SCREAMED! The gun developed a chip in the bolt rail and needed repaired. I gave the rifle to my best friend to take out to the gun shop where I picked it up...he moved to West Virgina and took my rifle with him. Never saw him or my rifle again

OBIO

Ivan
April 29th, 2011, 19:43
Hi OBIO,

The Mosin Nagant in 7.62 x 54R should not be all that expensive to shoot. Even 20 years ago, there was PPU Prvi Partizan Ulzice or something like that. It was Yugoslave boxer primed stuff imported by Hansen's gun shop up in CT. I shot a fair amount of the stuff before it all dried up with the Yugoslav Civil War.

These days, you can find either the Russian stuff or Sellier & Bellot. I would reload for the caliber except that you really can't find correct diameter bullets (.310 inch). You can find .308 and .311 and very light .310 intended for AK style guns. One of these days, I will try either very heavy .308 bullets or the .310 125 grain stuff and see if it works. Long range accuracy won't be possible though.

I betcha the 1916 Spanish Mauser was really chambered for the 7.62 CETME round. It is dimensionally the same as the .308 Winchester but runs at lower pressures. If I were you, I would not shoot full power .308 Winchester or 7.62 NATO in that gun.

Lots of military M1 Carbines didn't have a bayonet lug. That isn't a good way to determine origin. Manufacturer and serial number are a better way.

Cool Toys!!!
- Ivan.

HouseHobbit
May 12th, 2011, 11:13
The old 98 is the father of all modern High Pressure actions..

I have had MANY in my life, working as a Gunsmith for 25 years you see MANY of these..
My first 98k was a Czech Vz 24..

My Custom Czech Vz 21 is the best 98k Mauser I have ever owned..
I have two beautiful custom Mausers now..

Had them all from the G-88 to the 98k..
models 95, 96' and 96' improved, G88 and several different 98's
Including a old 98 with the .318 barrel; not the bored out later, .323 barrel..

I prefer a custom 98 to a military rifle..
Not into the military stuff..
With a good barrel and trigger these can be made into very accurate rifles..

I always warn folks about the Spanish and Turkish and Chinese Mausers, Not made to the highest standards. many have a Head Spacing problems..
Best to check them with a head space gauge before shooting..

My first mauser was 55 dollars..
Have seen them as cheap as 29.95 each in days gone by..

Now some poor souls pay several hundred for these..
But I shall say I never had a Mauser I didn't like..

Really liked the stainless steel actions from South America..
They just looked so cool with the "white" actions and the Blued barrels....
Used several of these to build up some beautiful Rifles, once you change to a faster set of springs, and decrease the lock time, they are very good sporting guns..

I hope you enjoy your Mauser as much as I have..:applause:

Ivan
August 16th, 2011, 04:29
Are you sure those were stainless steel actions? I am guessing they were just steel in the white. I believe these guns can be quite accurate, but the modern stuff is much stronger and handles gas better. My only Mauser 98 is a Belgian clone of a K98 except it is a short action and chambered in 7.62 for the Israelis. The trigger group on it originally was a WW2 stamped steel German military setup. I replaced it with a solid steel assembly but the problem is that the magazine well is too long for .308 and the follower flops around a bit. On the original, there is a little steel block welded to the front of the magazine well. Other than the markings and caliber, it looks just like a Karabiner 98.

- Ivan.