aeromed202
January 4th, 2010, 12:47
Ok, below are my specs and I have a MB question. My first stock one burned up so the WinFast 6150K went in and has worked fine. However I wanted more USB ports so took the front assembly with 2 USB and a mic/headphone cluster from my earlier emachines rig and screwed it onto the current one (the new one came without USBs in front). The USBs worked but the mic/headphones are not recognized. They are plugged into the audio connector on the MB as I assumed that was the right place. On closer inspection the colored wires are not arranged the same between the old and the new assemblies. If I could find the old MD this would not be a problem.
My question is how to fix this. The options are take the whole thing to a store and let the geeks do it ($$), try another connector location (IEEE 1394 ?) and risk blowing the thing up, pull wires and reassemble the connector so they look the same and also maybe blow the thing up. Any help would be most welcome.
My question is how to fix this. The options are take the whole thing to a store and let the geeks do it ($$), try another connector location (IEEE 1394 ?) and risk blowing the thing up, pull wires and reassemble the connector so they look the same and also maybe blow the thing up. Any help would be most welcome.