Pavehawk/blackhawk/seahawk family

[jagl04]

I am modding the excellent UH60 L from Cera Sim. I´m trying to contact them to ask for permission to share the models. Does anyone know another way to contact Cera Sim, other than the "contact us" form in their webpage?

http://www.fsfiles.org/flightsimshotsv2/images/2018/05/04/pavehawk.jpg

http://www.fsfiles.org/flightsimshotsv2/images/2018/05/02/armed-blackhawk.jpg (http://www.fsfiles.org/flightsimshotsv2/image/GKMa)

http://www.fsfiles.org/flightsimshotsv2/images/2018/05/02/SH60F-hellfire.jpg

http://www.fsfiles.org/flightsimshotsv2/images/2018/05/04/penguin2.jpg

[flewpastu]

Brother that is fantastic , great job , hope you are able to contact them

Bill

[iflyfsx214]

How about their Facebook page facebook.com/Cerasimaircraft/

[JAK_021]

Absolutely stunning! I'll be adding these if Cerasim approves! I can't imagine why they would not, it will only increase interest in purchasing their amazing UH-60 (I bought it the first day it was available!) to use with these worthy additions!

[docjohnson]

Those are excellent! Are these new models and textures based on the base Cera Sim Blackhawk model?

[Victory103]

Another outstanding mod to the H60. The stub wing is slightly different from the standard ESSS on the vanilla UH-60/S-70 and the short version used on USN MH60s. Have you seen them MH60K DAP wings?

[jagl04]

Those are excellent! Are these new models and textures based on the base Cera Sim Blackhawk model?

Yes, I have just added weapons, FLIR, tanks and so on. The base model is the UH 60 L, and the interior is unchanged

[jagl04]

Another outstanding mod to the H60. The stub wing is slightly different from the standard ESSS on the vanilla UH-60/S-70 and the short version used on USN MH60s. Have you seen them MH60K DAP wings?

The family of helicopters based on the blackhawk is really prolific, and there are, up to my knowledge, three different models of wings. By the moment I have modelled the Seahawk and MH 60K variants. The MH60L DAP will be the next one. Of course, I will be glad to have images and suggestions.

[Brian_Gladden]

How about a Firehawk?

[CG_1976]

What no Jayhawk lol

[jagl04]

I´m glad to announce that both Aerosoft and Cera Sim have given me permission to make and publish the mods of the Blackhawk family. My intention is to create some packs with differente variants. Jayhawks were not in my mind since they are available in the Aerosoft package, but if there are variations of the basic model (I ignore that), I could think about that. Now I need suggestions and, much better, pictures and blueprints of your ideas.


http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60250&stc=1

[jagl04]

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60249&stc=1

[flewpastu]

Just a small request if possible, would you put the handrails that are on the cera models (co-pilot and pilot ) on the Aerosoft jayhawk model ? If that’s even possible. I know it’s an old model but it’s the only one available (jayhawk) that s decent quality in the FS world . Just asking

Bill

[jagl04]

This is to flewpastu: can you post or send a detailed picture of that handrails?

[Victory103]

The hand rails are behind the pilot/copilot doors and actually are FM homing antennas with a “ NO HAND HOLD” stencil. On the Seahawk/Jayhawks they are not antennas but provided a gap between the jettisonable window and floats in the sponson/fairing. Not 100% sure on Jays, but the USN removed the inaffective floats since they didn’t really work and the helo sinks quickly.

[michelredsky]

please make the brazilian army aviation and brazilian air force models, with nose radar, winch and big external tanks, and the colombian air force AH-60L Harpia IV

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60253&stc=1

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60254&stc=1

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60255&stc=1

[flewpastu]

Thank you for the Correction Victory103, I learn something new every day. Jag104 , here is the pick of the antennas

Bill

[CG_1976]

The USCG Jayhawks have the Hand Rails both sides as I can see one of our Hawks atm. I'm crow hunting atm, so cant down there and get a better look. Im more of a Dolphin and Spartan Coastie. Although I have on occasion flew the Jay Hawk, I think of her as a flying Lumber Truck lol.

[iflyfsx214]

Are these mods Tacpack enabled or are they just visuals? Either way I can't wait to have them.

[ST0RM]

Great on progress work on the MH-60K and SH-60 so far.
Cant wait to see the USAF MH/HH-60G Pavehawk. Worked on them in AFSOC for several years so it'll be a joy to virtual fly them.

[jagl04]

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60276&stc=1

[Stinger]

Excellent can’t Wait to see the finished product ...😎

[Brian_Gladden]

Firehawk...

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60286&stc=1

[flewpastu]

Maybe this is a stupid question but I was always under the impression that one could not modify a model without the source files ? Now I don’t pretend to know what I’m talking about because I don’t lol, but what program is used to undertake something like this . Just curious for personal reasons ,there are a lot of models out there that could use some modifications .

Bill

[Victory103]

Great question as I wanted to do the same with adding Tacpack to my own payware models and needed help. If another modder has the same paid for model and he is only supplying me parts, not the whole model?

Aerosoft did provide a few different models in the original Seahawk/Jayhawks pack, but not all. I wanted to add the SH-60F and HH-60H and gave them a look in MCX. Is the 60F possible since Spain just recieved some used USN airframes jagl04? If they (Cera,AS) gave you permission does that mean future development of these models is over?

[jagl04]

Are these mods Tacpack enabled or are they just visuals? Either way I can't wait to have them.

As a first step they will be only visuals. Tackpack will be possible only for LAU missiles and guns, in a second step, because (up to my knowledge) Hellfires and Penguins are not included in Tacpack, unless I could discover a method to do that.

[Stinger]

AGM-65 Maverick might be possible alternate to the hellfire or penguin

[jagl04]

Great question as I wanted to do the same with adding Tacpack to my own payware models and needed help. If another modder has the same paid for model and he is only supplying me parts, not the whole model?

Aerosoft did provide a few different models in the original Seahawk/Jayhawks pack, but not all. I wanted to add the SH-60F and HH-60H and gave them a look in MCX. Is the 60F possible since Spain just recieved some used USN airframes jagl04? If they (Cera,AS) gave you permission does that mean future development of these models is over?

I´m really interested in obtaining an acceptable model of a SH60F since, as you said, we are receiving several ex-USN ones. Probably it will be easier to create a SH60F from the blackhawk Cera Sim model than using the Seahawk by Aerosoft: it is easier to add pieces that to retire parts of the original model.

The key to mod original models is the software created by Arno Gerretsen, mdlconverterX, freely available at www.scenerydesign.org.You can use it to convert the original .mdl files to editable files as 3DS. Once you have 3DS files, you can modify them using Gmax, also freeware. There is an easier, faster method, which is to create the parts you want to add to the model with you favourite software (Sketchup, Gmax, FSDS or any other). Then you convert them to .mdl files with mdlconverterX, and then merge the original model. Creating models for tacpack is slightly more complex. You can find full intructions, weapons and files at http://www.isoliti4gatti.it/, by Corrado (sorry, I forgot his family name). Also you can find many tacpacked planes.

[jagl04]

AGM-65 Maverick might be possible alternate to the hellfire or penguin

Good idea. I´ll have to test if once you fire a Maverick the Hellfires or the Penguin will dissapear from the helicopter. I´m not sure that will be possible.

[jagl04]

Firehawk...

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60286&stc=1

Really beautiful. Most of the work will go to textures, the water tank will be easy

[Brian_Gladden]

I am excited that you have permission to upload the Blackhawk variants. I already have the Virtavia Hawk and have a "Poor Man's" Pavehawk using the MH-60 K in that package. I had been holding off on purchasing the Cera bird since it was simply a transport bird. with your work I will be buying the Full Cera Hawk and possibly retiring the Virtavia.

[jagl04]

https://preview.ibb.co/ifLg3y/braziliam_hawk.jpg (https://ibb.co/cPyCAd)

[Victory103]

Thanks jagl04 I was using MCX and Corrado’s TMAP read-me to change some payware fighters to display weapons then “fire” Tacpack AI weapon simobjects. Just started and not close to your level as I wanted to make a 60F from Aerosoft 60B models, got as far as selecting object hierarchy then got scared I might mess something up! The idea of showing a Hellfire on the model and then a VRS Maverick hitting your lased target(laser designation has to be xml coded) should be the same as bombs/A2A missiles.

[jagl04]

https://image.ibb.co/jcDU6J/medevac.jpg (https://ibb.co/bQ7YYy)

[klnowak]

Realy fantastic work. If you are ready with all mods, i will trie to pull my Blackhawk out of the hangar and test all your variants on a ride :applause:

Greetings
Klaus

[Victory103]

Nice choice of paint jagl04, I’ve got time in #399 also know as “Patches” due to terrible battle damage repairs.

[jagl04]

Heroes do not always carry swords.

[jagl04]

https://image.ibb.co/inx9ad/armed.jpg (https://ibb.co/f5vvFd)

[tankerguy72]

Really beautiful. Most of the work will go to textures, the water tank will be easy

If you're going to do the Firehawk model. I did the textures a few years back and would be willing to share if thatll help?

https://farm1.staticflickr.com/957/42097754081_3e1070b9c2_b.jpg (https://flic.kr/p/2792ZCe)

[Brian_Gladden]

I'll take the paintjob!

[docjohnson]

So your question about what folks want in terms of UH-60 variants; how about helos from units like 160th SOAR or the USAF 55th SOS? If your willing I think it would be cool to honor the work of these units and aircraft with representative simobjects:

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60387&stc=1http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60388&stc=1http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60389&stc=1http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60390&stc=1http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60391&stc=1

I understand that you probably don't want to go to the stealth extreme since Area51 already has a stealth UH-60. Anyway those are my thoughts on the subject.

[Brian_Gladden]

Can't forget the Alaska Air Guard's "Ski-Hawks" Ski Equipped Pave Hawkhttp://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60393&stc=1

[jagl04]

If you're going to do the Firehawk model. I did the textures a few years back and would be willing to share if thatll help?

https://farm1.staticflickr.com/957/42097754081_3e1070b9c2_b.jpg (https://flic.kr/p/2792ZCe)

Really beautiful. That would be great. Are they available anywhere?

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60401&stc=1

[jagl04]

The basics of Tacpack are now working. Perhaps somebody in this forum can help me now. How do pilots guide the weapons? Do they have any type of visor/HUD to select the objectives?

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60403&stc=1

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60404&stc=1

[docjohnson]

I would have to see a reference to be sure, but I believe the MH-60 DAP has a fold away gunsight similar to what you see in the Milviz UH-1. For rocket ordnance its the sight picture, for hellfire or other guided ordnance I'm pretty sure they designate it with a laser target designator off of the gunsight and/or the sensor MFD that allows putting the beam on the target. There is in the later Nighthawks, a HMD for doing it by Mk I eyeball through the helmet visor/screen. I think this holds true for a UH-60 that is configured with guns and laser-guided missiles.

[kdfw]

this is great, looking forward to the mdl with the ext tanks.

this reminds me, i need to update the htr profile for p3dv4 for the uh60...

[Victory103]

The older early “K” DAP with the ability to fire the door mounted mini guns in fixed forward used a grease pencil. I know a few guys flying in that unit, but it’s really hard to ask them a tactical question. The standard NVG HUD could have a software update, or the IHADDS from the AH-64 might be used. All others require the EO/IR sensor to designate with laser, the Hellfire and new guided rockets.

[PhantomTweak]

Beautiful day for a flight, Skipper!
http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60434&stc=1

Yeah it is! Hey guys, watch this!
.
.
.
http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60435&stc=1

Hmmm...
Maybe that barrell roll wasn't such a great idea... :beaten:
:biggrin-new:

Have fun, all!
Pat☺

[michelredsky]

I decided to give a try and...

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60437&stc=1

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60438&stc=1

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60439&stc=1

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60440&stc=1

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60441&stc=1

[firerx]

If you're going to do the Firehawk model. I did the textures a few years back and would be willing to share if thatll help?

https://farm1.staticflickr.com/957/42097754081_3e1070b9c2_b.jpg (https://flic.kr/p/2792ZCe)

hey Tankerguy,
You ready to do a new livery of the Cal Fire ones that are replacing the Hueys? :jump:

[tankerguy72]

hey Tankerguy,
You ready to do a new livery of the Cal Fire ones that are replacing the Hueys? :jump:

I will be able to do the Cal Fire Firehawk textures but do not have the time right now. :running:

[kdfw]

https://imgur.com/a/ii5TGQNhttps://imgur.com/a/ii5TGQNmaybe add the sensors up front and the dust filter for the usn version?

https://i.imgur.com/2XUV4wo.jpg
https://i.imgur.com/V7PoeIj.png

[jagl04]

https://imgur.com/a/ii5TGQNhttps://imgur.com/a/ii5TGQNmaybe add the sensors up front and the dust filter for the usn version?

https://i.imgur.com/2XUV4wo.jpg
https://i.imgur.com/V7PoeIj.png

It is possible, does not seem to be difficult. By the moment, since there are a lot of possible models, I will prepare a first package with three pavehawks and four blackhawks, with a basic tacpack mod. Otherwise, models will never be available for other people.

[flewpastu]

Great news and a big thank you :applause:

Bill

[edakridge]

As far as "Guiding" the weapons: In Corrado's later TMAP incarnations, you can Lock a Surface/Airborne/Seaborne target with the radar and the missile will follow the Lock. I know of no way to actually "Steer" the weapons while in flight like you can with the Hellfire.

[jagl04]

First package uploaded: 3 Pavehawks and 5 Blackhawks, including 160 SOAR textures.

Next will be the aerosoft mod pack, once tacpacked. It will include FLIR, Hellefires and Penguin missile

https://image.ibb.co/jJ2fAo/hellfires.jpg

[Victory103]

Thanks jagl04, can’t wait to d/l when back at my gaming machine.

[Woogey]

Holy Cow you are a long awaited God Send! Question for you: could you modify the rear wing of the Cera bird to add the Square profile of the Navy variant? Also most of the "MH" series have this Square wing, and even the New Build Blackhawks are receiving this wing. In addition, could you take a look at the Aerosoft HH-60 model the Port side weapons pylon is the same shape as those that carry the Hellfire missles on the SH-60B/R's. In your modeling, it looks like you have added a separate pylon above the existing one. It should be an outcropping of the short pylon that bends upward. http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60799&stc=1http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60800&stc=1http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60801&stc=1http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60802&stc=1

Thank you sir for your extremely appreciated work, Sincerely -Woog

[Woogey]

Here's a couple more close up shots of the weapons pylon:

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60809&stc=1http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60808&stc=1http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60807&stc=1http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60806&stc=1

[jagl04]

Here's a couple more close up shots of the weapons pylon:

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60809&stc=1http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60808&stc=1http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60807&stc=1http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60806&stc=1

Your comments are very welcome and come just in time. I was preparing the package for Aersoft and now I will be able to correct this bug. The final Mod for Aerosoft will take some time more, but probable wll be more accurate. Thanks

[Seahawk72s]

If you should revisit the Cera Sim model would you consider a Navy type MH-60S...?
I trying one of Matt's USN repaints to your "armed" model but am having problems identifying which
"Army" textures need changing.

Here is the HSC-9 squadron page.

http://www.seaforces.org/usnair/HSC/Helicopter-Sea-Combat-Squadron-9.htm

Thanks for all the good work..

[Seahawk72s]

Matt has done some additional USN repaints for MH-60S squadrons.

HSC-26
http://www.seaforces.org/usnair/HSC/Helicopter-Sea-Combat-Squadron-26.htm



And HSC-3
http://www.seaforces.org/usnair/HSC/Helicopter-Sea-Combat-Squadron-3.htm

[Seahawk72s]

One more

http://www.seaforces.org/usnair/HSC/Helicopter-Sea-Combat-Squadron-22.htm


(http://www.seaforces.org/usnair/HSC/Helicopter-Sea-Combat-Squadron-22.htm)

[jagl04]

If you should revisit the Cera Sim model would you consider a Navy type MH-60S...?
I trying one of Matt's USN repaints to your "armed" model but am having problems identifying which
"Army" textures need changing.

Here is the HSC-9 squadron page.

http://www.seaforces.org/usnair/HSC/Helicopter-Sea-Combat-Squadron-9.htm

Thanks for all the good work..

You have to modify the textures "blackhawk-flir" and blakhawk-mod", both located in "terture.army" folder.

[Seahawk72s]

I have most of the textures identified except for the racks that hold the weapons.

[Victory103]

jagl04, sorry I missed that regarding Woog's post, I was focusing on the weapons. The fairing from the "wing" continues past the window, covering the fuel line from the drop tank that can hang on that rear fuselage rack. I've posted a pic of the cover removed when the wing is not installed on a HH-60H.

http://data3.primeportal.net/hangar/michael_block/hh-60h_163797/images/hh-60h_163797_02_of_91.jpg

[jagl04]

I have most of the textures identified except for the racks that hold the weapons.

You´ll fond them in the "textures" folder, under the name of "base-hellfire"

Great job

[jagl04]

jagl04, sorry I missed that regarding Woog's post, I was focusing on the weapons. The fairing from the "wing" continues past the window, covering the fuel line from the drop tank that can hang on that rear fuselage rack. I've posted a pic of the cover removed when the wing is not installed on a HH-60H.

http://data3.primeportal.net/hangar/michael_block/hh-60h_163797/images/hh-60h_163797_02_of_91.jpg

Very helpful, thanks.

[Seahawk72s]

Thanks.
This is a lot of fun and your work fits well with Matt's repaints...:encouragement:

[Victory103]

No problem, very happy to help. I looked over the models in MCX initially, but I'm getting a "flight model not found" error on the FSX load screen? The UH_60_L airfile is there and I see my original Cera clean models are not loading as well, so I doubt related to your mods.

[Seahawk72s]

I decided to give a try and...



http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60438&stc=1

http://www.sim-outhouse.com/sohforums/attachment.php?attachmentid=60439&stc=1





Hi,
Can you show more of what you are doing with the extended FLIR platform and low slung fuel tanks..?

Thanks...

[firerx]

Finally got the Paint scheme on the new Cal Fire FireHawks. for those that wish to ocreate the livery for )me) us. LOL :applause:

http://www.collectivemag.com/cal-fire-black-hawk/

[Woogey]

Jagl04, since you have been in contact with both Cerasim and Aerosoft, what do you think the odds are of either company incorporating your upgrades into their own official updates? Also for those of us that run P3d4 exclusively, do these models show in that sim?

-Woog

[jagl04]

Jagl04, since you have been in contact with both Cerasim and Aerosoft, what do you think the odds are of either company incorporating your upgrades into their own official updates? Also for those of us that run P3d4 exclusively, do these models show in that sim?

-Woog

I havent tested the models in P3D, so I cannot answer that.
And if Cerasim or Aerosoft are interested in using the mods, that´s freeware based on their models, so they can do it, of course.

[jagl04]

This is for Seahawk72s. Just adjusting some bugs

https://image.ibb.co/kNJ5F8/romeo.jpg (https://ibb.co/hH7za8)

[Seahawk72s]

Thank you sir...! She looks very good....:encouragement:

[flewpastu]

WOW that looks great :applause:

Bill

[Victory103]

Nice job moving the drop tanks on, something I have wanted for some time although years ago someone on Hovercontrol adjusted the Jayhawk to at least burn less fuel replicating more fuel onboard.

[flewpastu]

Jag104, these mods are great, do you have any plans for the Aerosoft Jayhawk for the future ? Like maybe replacing the spotlight on the starboard side of the fuselage with a fuel pod :jump: . Just asking and hoping at the same time . Thanks again for all your hard work on the mods

Bill

[jagl04]

Jag104, these mods are great, do you have any plans for the Aerosoft Jayhawk for the future ? Like maybe replacing the spotlight on the starboard side of the fuselage with a fuel pod :jump: . Just asking and hoping at the same time . Thanks again for all your hard work on the mods

Bill

Now I´m quite busy with the SH60R and the Firehawk, but the Jayhawk could be the next. If your are interested in a concrete nod, please, send me good pictures of the bird

[flewpastu]

Cool Deal, Ill get the pics and I totally understand this would be for the future so take your time

Bill

[Cirrus N210MS]

Great Job though the Ext views on the model are zoomed out crazy far i fixed them on mine if you want a copy of the fixed mdl files please let me know thanks again

[jagl04]

Great Job though the Ext views on the model are zoomed out crazy far i fixed them on mine if you want a copy of the fixed mdl files please let me know thanks again

I don´t know why the external views have changed. Could you please send me the fix?

[Seahawk72s]

I can appreciate the request list you must have at this point but wanted to float an idea for the future.
On the center console of the Blackhawk is that ugly steel plate that looks if it could deflect small arms fire.
Would it be possible to get rid of the plate and make the area under it a new VC surface so that for
example a weather radar could be placed there or what ever else a user might find useful..?

Thanks for all you have done so far. You have certainly breathed new life into these helos.

[flewpastu]

The Blackhawk mods and the fire hawk mod is up for download, this just keeps getting betterand better . Thanks to all for these addons :applause:

[Seahawk72s]

From the interior the Pavehawk tanks are not visible.
You can see the ground shadow, but no tanks.

[jagl04]

From the interior the Pavehawk tanks are not visible.
You can see the ground shadow, but no tanks.

Thats right: I forgot to add the tanks in the interior model. The fix for tanks is for the blackhawk model, not for this Pave. I´ll try to remember to fix this in the next part

[Cirrus N210MS]

ok

Befor i fixed them it was like looking threw a Telephone lens on a Camera :adoration:

https://drive.google.com/open?id=1fPqaPd8g1c4QYxkCrWbRoWL2KrGJ7jO6

do you want me to take a Look at the Other models test them for you?

https://www.facebook.com/MichaelWildcard9/videos/10214658244843403/

[jagl04]

ok

Befor i fixed them it was like looking threw a Telephone lens on a Camera :adoration:

https://drive.google.com/open?id=1fPqaPd8g1c4QYxkCrWbRoWL2KrGJ7jO6

do you want me to take a Look at the Other models test them for you?

https://www.facebook.com/MichaelWildcard9/videos/10214658244843403/

Thanks a lot, but now that is not necessary: I have had a look at Secenerydesign and this is a common problem when files are compliled many times using mdlxconverter. There is a tool (RADitor) to fix the problem, very easy to use: https://www.scenerydesign.org/raditor/. I will fix this new bug in next versions, if I have time to go on with this

[Cirrus N210MS]

Thanks a lot, but now that is not necessary: I have had a look at Secenerydesign and this is a common problem when files are compliled many times using mdlxconverter. There is a tool (RADitor) to fix the problem, very easy to use: https://www.scenerydesign.org/raditor/. I will fix this new bug in next versions, if I have time to go on with this


Happy to help any time you do amazing work

[Victory103]

Cirrus N210MS, are you running the stock airfile that came with the Cera? 200kts is a tad too fast.

[Cirrus N210MS]

Cirrus N210MS, are you running the stock airfile that came with the Cera? 200kts is a tad too fast.

yep lol o and i added a fully working Flight 1 Garmin GT750 in the VC :wiggle:

https://www.facebook.com/468163866960519/videos/470345903408982/

[Seahawk72s]

Looks interesting.
Can you explain how you did it..?

[Cirrus N210MS]

Looks interesting.
Can you explain how you did it..?


Lots of work and You Need to have the Gauge :-)

[Seahawk72s]

Lots of work and You Need to have the Gauge :-)

Forget the gauge. I'm interested how you placed a VC surface to mount it.
Could you have removed the plate underneath it and then placed the gauge there...? Flat on the panel..?

[Cirrus N210MS]

Forget the gauge. I'm interested how you placed a VC surface to mount it.
Could you have removed the plate underneath it and then placed the gauge there...? Flat on the panel..?


Really not that Easy :jump: if it was that would be nice worlds not that perfect

[flewpastu]

can someone point me in the right direction for where I can find these to paint to match . Ive looked and tested the Blackhawk mod file and I cant seem to find it . Is it on the backhawk flir file ?

Bill

[Seahawk72s]

can someone point me in the right direction for where I can find these to paint to match . Ive looked and tested the Blackhawk mod file and I cant seem to find it . Is it on the backhawk flir file ?

Bill

I'll send you a PM.

[Seahawk72s]

Hello,
Could you tell me what textures these objects are assigned to..
They are on the Pavehawk model..
Thanks...

[Seahawk72s]

Bump...if you please....

[jagl04]

Hello,
Could you tell me what textures these objects are assigned to..
They are on the Pavehawk model..
Thanks...

My apologies, I was out and missed this message: they have no textures assigned, just material. If you need tho change the colour, it can be done with mdlconverter.

[Seahawk72s]

An interesting report on Sikorsky HH-60G Pave Hawk replacement...

https://www.verticalmag.com/press-releases/gao-releases-report-on-usaf-plans-to-replace-personnel-recovery-helicopter-fleet/?utm_source=vertical-daily-news-top-story&utm_campaign=vertical-daily-news&utm_medium=email&utm_term=top-story&utm_content=V1


Its replacement:....

https://www.airforce-technology.com/projects/hh-60w-combat-rescue-helicopter-crh/

[DaleRFU]

Sorry tbut dig up an old thread but will these mods work in P3Dv4?

[jagl04]

It works fine in P3D 3.2, I don´t know if it does in more advanced versions

[klnowak]

For me it is working fine in P3D 4.5

greetings
Klaus