PDA

View Full Version : Bill Lyons Goose in FSX



Reddog
February 5th, 2009, 16:52
I got his Goose to work in FSX(SP1), biggest problem was getting it to work in the water. Just a little while back at Flightsim.com some one posted a FSX update for Mike Stones goose. I used the float section in the Contact points from that and put them in Bil's goose. It now sits level in the water and takesoff and lands okay but it needs to sit lower in the water. Can someone please tell me which numbers in the contact points need to be changed. Thanks much.:help:

Boomer
February 5th, 2009, 17:17
If memory serves...

When you look at the contact point section of the cfg the 1st 3 sets of numbers are the ones you are interested in. The 1st number is fore & aft of the CG, 2nd is up & down & 3rd is left right.

Boomer
February 5th, 2009, 17:19
Ok I didnt want to do you a disservice so I just checked & yeah I was right.

Open the C172 & look at its cfg. Just above the contact points section it spells out what each number is for.

Reddog
February 6th, 2009, 05:34
Thanks for the info I'll see what I can do with it

GaryGB
February 7th, 2009, 07:32
Hello:

Here's a couple of informative threads on adjusting the water positioning and navigation parameters for the FSX default Goose; perhaps some of this may merit consideration with porting Bill Lyons' Goose to FSX as well.


http://forums1.avsim.net/index.php?showtopic=61905&hl=goose+contact

http://forums.simflight.com/viewtopic.php?f=230&t=71923&p=445049&hilit=amphibian#p445049


Hope this helps!

GaryGB